Is it possible to glue the needle back in providing that I can find the exact location it was pointing at?

 

Negative ghost rider

 

Well crap again. Thanks anyways guys i appreciate it.

 

Like I said its done. Go to the jy and pull a cluster out and remove the gas gauge face and stepper motor and mini circuit board.

 

Okie dokie

 

Will the renix iac bolt up and work correctly in the ho iac motor housing? Just. Curious since my renix iac is brand new

 

i believe the IAC will, but the TPS will not. I'm not sure if they have the same in/out signal though...

 

Can someone possibly confirm my suspicions? This morning while trying to start my jeep it wasn't turning over and making clicking noises. At first I thought the starter went out. After work this afternoon Tried to start it again and the battery is completely drained. Is this the alternator that drained my battery?

 

Jump start your car. Remove the positive terminal from the battery, if your engine dies your alternator is bad, if the jeep keeps going its your battery or you have a short draining your battery

 

I tried jump starting it with no luck

 

Then it's either a bad battery or you didn't use big enough cables to jump it.

 

Thanks,dukie564!
Their price is outrageous! 147.00
Any other ideas or I will have to sick with that....

 

That or his battery I corroded didn't make good contact, didn't rev engine enough.

OP take pics of your battery tomorrow.

Also you say you got a click, click, do you have any other electric working

 

The battery is only 3 months old. Thats what I was thinking the cables or a short somewhere.

 

I will. There was a clicking just for a sec, then nothing. Also it seems that the battery is now charging just enough to lock the door or turn the key. Then it dies completely again. Almost instantly.