Sep 21, 2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
CF ADMIN
Joined: Sep 2010
Posts: 34,088
Likes: 257
From: Lantana, Fl
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Originally Posted by t&l81cj5
po had son change engine oil, son drained trans, filled engine with 6 more quarts of oil, test drove, 4 miles, dad drained 12 quarts from engine, changed filter and added correct oil to engine, changed filter on trans added correct amount of fluid to trans.
Sitting for several years, now won't shift on time and never goes into OD, regular driving 1-2 shift about 3000 rpm 2-3 about 4000 rpm 3-4 hasn't yet happened.
Sitting for several years, now won't shift on time and never goes into OD, regular driving 1-2 shift about 3000 rpm 2-3 about 4000 rpm 3-4 hasn't yet happened.
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
I have Rough Country (got them used) - if I did it again i'd go with these or AlloyUSA though
http://www.quadratec.com/products/92807_300X_PG.htm
http://www.quadratec.com/products/92807_300X_PG.htm
CF ADMIN
Joined: Sep 2010
Posts: 34,088
Likes: 257
From: Lantana, Fl
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Originally Posted by dukie564
I have Rough Country - if I did it again i'd go with these or spidertrax though
http://www.quadratec.com/products/92807_300X_PG.htm
http://www.quadratec.com/products/92807_300X_PG.htm
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Question. As I'm driving my temp gauge keeps dropping to about a quarter than down than back to 210. As it happens I hear a weird rattling from the front end. What should I look for when I go under the hood?
Newbie
Joined: Feb 2012
Posts: 9
Likes: 0
From: Schoolcraft, MI
Year: 1989
Model: Cherokee
Engine: 4.0L
Very true. Thanks,
This was suppose to be my winter beater, bought it for $300.00, replaced the floors, radiator, t-stat, front seats, u-joints and tie-rod end. just looking for the easiest way out now. probably just pull it and have it gone through.
Is it true that the 86-90 are the only models that will bolt in? Any info would be appreciated.Thanks
This was suppose to be my winter beater, bought it for $300.00, replaced the floors, radiator, t-stat, front seats, u-joints and tie-rod end. just looking for the easiest way out now. probably just pull it and have it gone through.
Is it true that the 86-90 are the only models that will bolt in? Any info would be appreciated.Thanks
CF Veteran
Joined: Nov 2010
Posts: 15,581
Likes: 8
From: some small town oregon
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by t&l81cj5
Very true. Thanks,
This was suppose to be my winter beater, bought it for $300.00, replaced the floors, radiator, t-stat, front seats, u-joints and tie-rod end. just looking for the easiest way out now. probably just pull it and have it gone through.
Is it true that the 86-90 are the only models that will bolt in? Any info would be appreciated.Thanks
This was suppose to be my winter beater, bought it for $300.00, replaced the floors, radiator, t-stat, front seats, u-joints and tie-rod end. just looking for the easiest way out now. probably just pull it and have it gone through.
Is it true that the 86-90 are the only models that will bolt in? Any info would be appreciated.Thanks
CF Veteran
Joined: Dec 2010
Posts: 1,240
Likes: 0
From: Rocket Country MI
Year: 1999
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Jan 2011
Posts: 1,762
Likes: 0
From: Randoph ohio!
Year: 98
Model: Cherokee
Engine: 4.0L
What's your preferences on bed liner paints? I am considering redoing mine but my last stuff wore out in a lil over a year so im gonna redo my trim and then also some extra spots