With mine when im in part time the 4x4 light is on and in high lock or low lock the LOCK light comes on.

 

awhile back i posted bout my jeep dying while i was driving it. got it fixed, was a starter wire shorting out. went to pick it up today, started right up, reved to 3000rpm by itself then died. racked my brain, come to figure out my effin fuel pump went out.
my question: has anyone had to replace a TBI type fuel pump and it it a PITA to do?

 

question....i got a 97 cherokee laredo.....i start it and when i take off for the first time its super sluggish like it wants to gag out. itll do it for about 5 seconds till i let off the gas and then itll catch and go....after that it doesnt do it anymore but will do it every start up...ive replaced the tps and cleaned the throttle body and still got the issue..any suggestions???

 

Hey I got a major problem!
Today I drove for about 15 min then I hit a pretty nasty bump.
Soon after that I realized when I tried to go over 2 grand rpm my jeep sounded like it puttered out and bogged down? Then would idle kinda rough.. I don't quite understand what's going on with my jeep and then I let it cool down for an hr and drove it again and it started off real rough and bogged way down then after some seconds I floored it and it sounded like it got cleaned out and didn't do it again then I turned her off to sit for the night any opinions send em my way please.
Thank you

 

This is a complete guess but you could have dislodged some debris in your fuel your fuel line that got caught in the injectors. When you floored it it pushed through. See if it happens tomorrow.

 

i got a question....i have oil dripping from the front bottom of the engine, do you think its the oil pan or the crank seal

87 cherokee, 4.0, 5 speed

 

The more common of the two is the oil pan gasket.

 

Thanks man but hey is the gas tank easy to drop? And check the lines n what not

 

The hood latch cable snapped at my pull hood lever how much is a new onne and do I have to goto chrysler?

 

X3 on the POR 15. I use it. It's great. Unfortunately, its UV sensative, so use it on the inside, not the outside. I painted my engine with their kit, I had to be different so I used the old Chrysler sea green or whatever they call it...I just had to be different...really don't like a black block. Cant tell where its leakin from if it starts too....so I guess its kinda a win win thing here....

 

Actually Dorman makes a lot of the replacement parts people look for ... Just the other day someone was looking for the water pump tube, said no one could get it. I have the Dorman number if anyone needs it...I ALWAYS replace that tube....anyone can PM me if they can't find a part.. I use 4 vendors...But just letting you know that Dorman makes a lot of parts that seem unobtainable.

As far as the hood release cable...They make it...I've gotten it from them. BUT ALWAYS CHECK THE DEALER PRICES...sometimes they are cheaper...not always..but sometimes.... go figure..

 

I have no idea. Never done it.

 

Torque spec for pinion bolt on spiced 35 rear for a 92 xj? Need help plz

 

do you have the procedure for TPS adjustment on a manual

87 cherokee 4.0

 

Im looking for some fender flares but not bush wacker are there any brands ?