Sep 21, 2015, 03:49 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
I have a 1988 Cherokee laredo. I just purchased it and there is a horrible death wobble. I replaced front stab links, front left and right upper and lower control arms, front wheel bearings.... I bought a new steering stabilizer and tie rod end also but have not yet installed them. As soon as I hiT 50 death wobble kicks in everytime. Track bar looks ok.. It does need alinment and wheels balanced. A friend told me front axles were causing it and he cut them out!!! The yokes are still in place. Any ideas on fixing this thing.. Also i pressure washed the engine now it wont shift out of 1st. Looks like it may be tps sensor by reading some posts on here.. Can i just use a blow dryer on it or do i need to replace it?? Its been 3 days now still wont shift? Any help would be great. Thank you
Second - obviously get the wheels balanced. Unbalanced wheels will certainly cause a massive vibration problem.
Death wobble is usually because of worn trackbar bushings. Replacing the trackbar would be my first step after balancing the wheels, as well as replacing the tie rod end and steering stabilizer since you already have the part.
On the shifting issue, you most likely need to replace the TPS sensor - it doesn't like water sprayed directly on it.
CF Veteran
Joined: Sep 2010
Posts: 1,024
Likes: 0
From: Coos Bay, Or
Year: 1990
Model: Cherokee
Engine: 4.0
So my jeep has been hesitating lately and haven't much time to take a look at it but the other I was pulling out of a parking lot and it started to hesitate at the worst time as I was entering traffic soo I give it alittle more gas and then I hear the loudest bang! Scared the s*** out of me. Anyways it then sounded straight piped and it started to run better and not hesitate...sure enough I pull over and look to find my muffler had popped of and hanging with the tail pipe. So my question is could it be that I had a restricted muffler or maybe I just didn't have that clamp tight enough? The muffler is a flowmaster I've had for about 3 years now and I had to take apart last year and put it together with clamps till I could get it welded. Thanks for any help and sorry if I gave too much info lol
CF Veteran
Joined: Apr 2010
Posts: 1,053
Likes: 0
From: fallon, nv
Year: 1988
Model: Cherokee
Engine: 4.0
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
If you're using the stock CAT and muffler, stick with 2.25" piping. If you don't you won't get good exhaust flow due to the empty space. I necked up to 2.5" with mine because of the free-flowing exhaust.
CF Veteran
Joined: Jan 2011
Posts: 11,176
Likes: 1
From: Ohio
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by dukie564
my setup is the stock 2.25" downpipe, 2.25" high-flow CAT, neck up to 2.5" Flowmaster muffler, and 2.5" custom mandrel bent tailpipe.
If you're using the stock CAT and muffler, stick with 2.25" piping. If you don't you won't get good exhaust flow due to the empty space. I necked up to 2.5" with mine because of the free-flowing exhaust.
Junior Member
Joined: Jun 2011
Posts: 36
Likes: 0
From: Virginia
Year: 1996
Model: Cherokee
Engine: 4.0
got a question just bought a 96 cherokee sport, runs great but whenever i takeoff something pops i checked the u joints an there new so i have no clue wat it could be
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
http://www.google.com/search?hl=en&s...pacer+cherokee
If you choose the spring compressor method, make sure to rent a "Strut Spring Compressor" tool (the 2 piece one). They are MUCH safer than regular coil spring compressors.
Last edited by dukie564; Jun 27, 2011 at 07:40 PM.
