Yup, I'm thinking CPS...

 

Oh yes, I forgot! I sprayed some starter fluid into the carb and got absolutely no change. This seems to support the no spark condition does it not?

 

Re: Overhead Console Install

Found one in good condition and want to put it in my '01 XJ. However, the wiring for it was cut before the fusebox and the harnesses are not available and the temp sensor is not included.

How hard will this be to wire into my Jeep (I assume I won't be able to find the actual harnesses anywhere)?

Where can I get the Temp sensor as it isn't included?

Thanks,
Jamie

 

If it has no spark it's not going to fire...

 

I think it's either not the CPS or you are getting fuel and you aren't aware of it.

When you turn the key on it should prime and then stop. It'll only start up again once the engine starts.

If you're not getting a prime at all then the fuel issue has nothing to do wtih the CPS.

 

Do parts stores stock the O ring for speedo gears?

 

They should have a box full of different o-rings you can choose from.

 

Good point this is true. Besides can't the cps be tested if anything for voltage

 

That verifies that its a no spark and ain't a fuel delivery problem

 

How would that verify that it's not a fuel delivery problem?

It does verify that it's not getting spark but it doesn't verify that he's getting fuel. The OP says he's not getting either.

 

This isnt quite the place but I didnt need a whole thread either... Who around here makes custom stickers? I am wanting to get something like this just black and white with Ar-15s in a crossbone pattern behind the skull

 

https://www.cherokeeforum.com/f10/vi...ything-110279/

 

Me.

But ole dude can probably do it cheaper and faster. lol

 

^ Send me a quote, shipped. And we shall see :P

 

Does anyone have experience with 500 denier Cordura nylon? I'm thinking of using it as headliner material. I want something that's not going to rip like the stock headliner fabric.