Jeep Cherokee Forum

Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.
Old Sep 21, 2015, 03:49 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: General Overview
Print Wikipost

XJ Ask the Question Thread

   
Old May 5, 2013 | 07:16 PM
Share
  #30121  
sycoglitch's Avatar
sycoglitch
CF Veteran
 
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Default
Originally Posted by xj_maniac_newb

I'm going to guess you meant soft *****. And yes, yes, they work.
Lol yea I looked too fast, that's why I was curious if it worked. Good to know about the soft ball though
Old May 5, 2013 | 07:18 PM
Share
  #30122  
sycoglitch's Avatar
sycoglitch
CF Veteran
 
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Default
Originally Posted by 94XjSport94

Yeah they do. Notice how my bumpstop towers are hacked to ****? I run a 12" circumference softball and three hockey pucks on each side. Works very well. Haven't came down on them hard yet but they do compress a little bit... Can't complain, got them for free lol
I may run the soft ball idea as a temp bumpstop
When I upgrade to 32s.
Old May 5, 2013 | 07:22 PM
Share
  #30123  
94XjSport94's Avatar
94XjSport94
CF Veteran
 
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Default
It works lol no shame here.
Old May 5, 2013 | 07:23 PM
Share
  #30124  
xj_maniac_newb's Avatar
xj_maniac_newb
CF Veteran
 
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Default
Originally Posted by 94XjSport94
I run the 4.1" ones from 4wd hardware and they still don't touch the axle. Need to build strike plates for them
I think i may have mis-said what i said.. I have one left, and its in the back. Lol. I'm just afraid a striker plate will limit the uptravel too much. But hell i havent even had a chance to flex mine yet.
Last edited by xj_maniac_newb; May 5, 2013 at 07:30 PM.
Old May 5, 2013 | 07:28 PM
Share
  #30125  
ccooper1234's Avatar
ccooper1234
CF Veteran
 
Joined: Oct 2011
Posts: 1,812
Likes: 0
From: South Mills, NC
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6
Default
Originally Posted by 94XjSport94

I bought a set of coil spacers and RC shackles from them. Good service. No complaints. Don't buy this kind of spacer

Get the kind with a flat spot on them.
I'll be getting a 2" lift lift kit from them so my new tires won't rub.
Old May 5, 2013 | 07:30 PM
Share
  #30126  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
Originally Posted by xj_maniac_newb

I think i may have mis-said what i said.. I have one left, and its in the back. Lol. I'm just afraid a striker plate will limit the uptravel too much. But hell i havent even had a chance to flex mine yet.
Your compression is limited when your tires rub, anyway. The idea of proper bumpstops is to prevent that so you get max articulation without destroying your tires. A 1" striker plate is the same as 1" longer bumpstops.
Old May 5, 2013 | 07:34 PM
Share
  #30127  
ccooper1234's Avatar
ccooper1234
CF Veteran
 
Joined: Oct 2011
Posts: 1,812
Likes: 0
From: South Mills, NC
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6
Default
My front is sagging and when I want over a bump when I was turning it the tire rubbed on the fender. It sounded like an Uzi
Old May 5, 2013 | 07:34 PM
Share
  #30128  
xj_maniac_newb's Avatar
xj_maniac_newb
CF Veteran
 
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Default
Originally Posted by NewKindOfClown
Your compression is limited when your tires rub, anyway. The idea of proper bumpstops is to prevent that so you get max articulation without destroying your tires. A 1" striker plate is the same as 1" longer bumpstops.
Oh that i know. My fenders and tires love each other. I havent *Needed* bumpstops as of yet because i've yet to need my suspension to really articulate. Besides when i jumped the jeep the other day.. Thought i blew all 4 of the flares off.
Old May 5, 2013 | 08:43 PM
Share
  #30129  
mcd58's Avatar
mcd58
Member
 
Joined: Sep 2012
Posts: 200
Likes: 0
From: ct
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Default
whats the easiest ways to remove the factory wire harness from the stock head unit? i have an aftermarket one that i want to put in.
Old May 5, 2013 | 08:52 PM
Share
  #30130  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
Originally Posted by mcd58
whats the easiest ways to remove the factory wire harness from the stock head unit? i have an aftermarket one that i want to put in.
Unplug it and get a Metra harness. Match the Metra plugs to the factory harness, and solder or use crimp caps to attach the Metra harness wires to the new unit.
Old May 5, 2013 | 08:52 PM
Share
  #30131  
xj_maniac_newb's Avatar
xj_maniac_newb
CF Veteran
 
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Default
Originally Posted by mcd58
whats the easiest ways to remove the factory wire harness from the stock head unit? i have an aftermarket one that i want to put in.
There should be a connector, unplug it. Then get a wiring kit for you jeep that plugs into the stock harness connector to give you a bunch of wires to wire in the new radio. Makes things SOOOO much easier.
Old May 5, 2013 | 08:53 PM
Share
  #30132  
xj_maniac_newb's Avatar
xj_maniac_newb
CF Veteran
 
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Default
Originally Posted by NewKindOfClown
Unplug it and get a Metra harness. Match the Metra plugs to the factory harness, and solder or use crimp caps to attach the Metra harness wires to the new unit.
Damn you clown.

And crimping and soldering is the hard way.. I always just use tape and/or wire nuts
Old May 5, 2013 | 08:55 PM
Share
  #30133  
NewKindOfClown's Avatar
NewKindOfClown
Moderator of Jeeps
 
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Default
Originally Posted by xj_maniac_newb

Damn you clown.

And crimping and soldering is the hard way.. I always just use tape and/or wire nuts
No. You're wrong.

Seriously, at least use crimp caps (not butt splices), and tape the wires together so they don't pull apart behind the dash.
Old May 5, 2013 | 08:56 PM
Share
  #30134  
mcd58's Avatar
mcd58
Member
 
Joined: Sep 2012
Posts: 200
Likes: 0
From: ct
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Default
how do i unplug the connector though. does it just pull out? i didnt want to break by pulling to hard.
Old May 5, 2013 | 08:57 PM
Share
  #30135  
xj_maniac_newb's Avatar
xj_maniac_newb
CF Veteran
 
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Default
Originally Posted by NewKindOfClown
No. You're wrong.

Seriously, at least use crimp caps (not butt splices), and tape the wires together so they don't pull apart behind the dash.
I agree. Its actually better AND easier his way.

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 12:45 AM.