Bottoms mounted straight to axle, metal against metal, will have to double check the tops but I think they are good

 

Go screw yourself

 

Only kidding man, does the rear end have the same 1.5 inch difference as well or just the front?

 

Someone can't take a joke

 

X2^

 

It sounds like you have a coilspacer stuck to the top on one side?!? Exactly 1-1/2" exactly is a very strange coincidence.

 

Sorry not in a joking mood, just dropped a few hundred in parts to still have same problem.

Yes the whole heep leans right. Whole time thought suspension worn. Leafs are flat. Upper coil rubber are good. My 1.5 spacers are good, inspected then when took old springs out

 

Tomorrow could you take some good driver/passenger pics? We may be able to help better if we can see it.

 

x2.

 

What do u want pics of.

I measured from floor to a body line to get the measurements

 

What do you meen?

I have 1.5" spacer between top of coil and coil rubber mount

 

Just take a close up picture of each side so we can see it.

 

Try removing the rubber mount on the coil. It is fine to just let 1.5" spacer ontop of the coil. You do not need another isolator.

 

Is it possible that there is an additional old coilspacer stuck at the top of one side??

 

it wasn't like that when I got her. Its happened after wheeling at wellsville