why my Cherokke shudders when I give it the gas
CF Veteran




Joined: Nov 2015
Posts: 2,863
Likes: 201
From: syracuse ny
Year: 1997 230,000 miles
Model: Grand Cherokee (ZJ)
Engine: 4.0, new lifters valve job with new springs and exhaust valves, preload set with shims
frame rotted at the transmission cross member?
Trending Topics
Junior Member
Joined: May 2018
Posts: 39
Likes: 0
From: Jacksonville, AL
Year: 1997
Model: Cherokee (XJ)
Engine: 4.0 I6
Mine had a blown head gasket causing minimal power on two cylinders. I suggest doing a cylinder compression test.
Got the problem solved. The first guy I took it to told me transmission. I had told him that it felt like U-joints. He said Naw it's worse ! So after three different transmission shops, all agree. The original mechanic either didn't know or didn't want the job ???? Why.
Got joints replaced with Spicers,smooth as silk now.
#1 guy caused me a lot of crap !
Got joints replaced with Spicers,smooth as silk now.
#1 guy caused me a lot of crap !
CF Veteran
Joined: Nov 2017
Posts: 3,700
Likes: 238
From: Groton, MA
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
Got the problem solved. The first guy I took it to told me transmission. I had told him that it felt like U-joints. He said Naw it's worse ! So after three different transmission shops, all agree. The original mechanic either didn't know or didn't want the job ???? Why.
Got joints replaced with Spicers,smooth as silk now.
#1 guy caused me a lot of crap !
Got joints replaced with Spicers,smooth as silk now.
#1 guy caused me a lot of crap !
Mechanic #1 was either inept or simply didn't want the job. Mechanics don't like working on these old, high mileage vehicles for several reasons, but there's been a few recent posts where people are being refused jobs or quoted super high prices and the the general consensus is:
- Stuck fasteners
- Penny pinching owners (or owners that know a lot about their vehicles and will look at the work with a highly critical eye)
- Unrelated problems being blamed on the repairs.
Ultimately the mechanic feels like he's better off taking easier work on newer vehicles and hence making more money that way.
Junior Member
Joined: May 2018
Posts: 39
Likes: 0
From: Jacksonville, AL
Year: 1997
Model: Cherokee (XJ)
Engine: 4.0 I6
Not so much for pinching pennies, I just hate for someone else to work on my vehicles!!!
But as I get older and develop more aches and pains I realize that I am gonna have to let others work on my vehicles,,,they better be good!!!
"your u-joints were also dicey so I went ahead and changed them out too. At an added cost of course".
Thread
Thread Starter
Forum
Replies
Last Post
LesMizzell
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
Oct 4, 2013 10:40 PM
the_mutt
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Dec 4, 2011 05:43 AM
Swamprat
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Mar 26, 2011 03:41 AM
proeliumfessus
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
10
Dec 11, 2010 03:26 PM
cherubkey
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Jun 29, 2009 03:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



