When i back up i hear a popping noise
Thread Starter
Newbie
Joined: Nov 2015
Posts: 4
Likes: 0
From: North Carolina
Year: 2001
Model: Cherokee
Engine: 4.0
When I back up I hear a popping noise under my jeep. I feel something right under my feet..it only happens when I back up and turn my wheel clock wise. Anyone have an answer or idea. Thanks
You might want to also look at your trans mount, here is a quick fix, and what to look for,
http://www.jeepforum.com/forum/f11/b...ement-1046436/
If not that you may want to look at your rear brakes, they might be warn out and the star wheel that automatically adjusts your rear brakes when you go in reverse and hit the brakes might be at maximum allowed adjustment and every time you hit the brakes it tries spinning to adjust them and nothing adjusts.
http://www.jeepforum.com/forum/f11/b...ement-1046436/
If not that you may want to look at your rear brakes, they might be warn out and the star wheel that automatically adjusts your rear brakes when you go in reverse and hit the brakes might be at maximum allowed adjustment and every time you hit the brakes it tries spinning to adjust them and nothing adjusts.
Thread Starter
Newbie
Joined: Nov 2015
Posts: 4
Likes: 0
From: North Carolina
Year: 2001
Model: Cherokee
Engine: 4.0
Senior Member
Joined: Apr 2013
Posts: 781
Likes: 2
From: Dawson Springs, KY
Year: 1985
Model: Cherokee
Engine: 2.5L
I have a noise like this in my 85xj. When I back up and turn the wheels 2/3 to lock I hear a series of pops, it will then pop again if I turn the wheels 2/3 to the opposite lock while going forward. Turning it sharply going forward will not cause it to happen, only when backing up first. It normally happens when backing out of a parking space.
I removed the steering damper but that wasn't it, then changed out the track bar but that wasn't it either. It started not long after changing the unit bearings and u-joints up front. I don't think it is either of those. I was wondering if it could be the control arm bushings? Maybe the can holding the rubber bushing is moving in the control arm sliding back and forth as I move in either direction?
I removed the steering damper but that wasn't it, then changed out the track bar but that wasn't it either. It started not long after changing the unit bearings and u-joints up front. I don't think it is either of those. I was wondering if it could be the control arm bushings? Maybe the can holding the rubber bushing is moving in the control arm sliding back and forth as I move in either direction?
Trending Topics
CF Veteran

Joined: Feb 2015
Posts: 1,528
Likes: 2
From: North Carolina
Year: 1993
Model: Cherokee
Engine: 4.0
What cruiser said, also mine was popping. Turned out to be the axle end on the track bar. Even though it was tightened, the axle bracket holes were wallowed out so much that it would pop back in forth within the hole.
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
The track bar to frame bracket!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
95Cherokee32s
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Dec 14, 2015 02:50 PM
Morris4x4Center
Vendor Showcase
1
Nov 25, 2015 09:02 AM
jp1017
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Nov 14, 2015 03:28 PM
rizmonkey
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
Nov 11, 2015 01:46 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



