Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Steering Problems

Old Feb 6, 2016 | 02:29 PM
  #1  
JohnOH327's Avatar
Thread Starter
Newbie
 
Joined: Nov 2014
Posts: 10
Likes: 0
Model: Cherokee
Default Steering Problems

Returning from a trail run last week when my 95 Cherokee decided it did not want to turn left. Would turn a small amount but had to back up to make a left turn. At first thought my front locker was on. It wasn't. Got home and played around with it. Checked fluid, OK. Out of 6-8 tries, it did turn left once. Have no idea why. Is my steering box shot or is there something else I am missing? Thanks.
Reply
Old Feb 6, 2016 | 08:51 PM
  #2  
Bsichter01XJ's Avatar
Junior Member
 
Joined: Aug 2015
Posts: 34
Likes: 0
From: Colorado Springs
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Check your track bar, that might be an issue. It may have loose or even lost bolts.
Reply
Old Feb 7, 2016 | 01:19 AM
  #3  
JandDGreens's Avatar
CF Veteran
 
Joined: Jan 2013
Posts: 1,029
Likes: 35
From: Colorado
Year: 1991 2-Door
Model: Cherokee
Engine: 4.0 liter
Default

Steering box bolts broke? Cracked frame? That happened to my sons old XJ
Reply
Old Feb 7, 2016 | 01:40 AM
  #4  
JandDGreens's Avatar
CF Veteran
 
Joined: Jan 2013
Posts: 1,029
Likes: 35
From: Colorado
Year: 1991 2-Door
Model: Cherokee
Engine: 4.0 liter
Default

One of the problems with our XJ is that the front frame rails don't hold up well with the larger tires we are throwing on them. It is a good idea to throw a brace from the other frame rail. Also stiffeners will help prevent the failure around the steering box.

This happened to both my sons XJ and mine, very common. Here is a link to the page (next 2 pages) of my fix for mine. http://www.cherokeetalk.com/forum/f2...99/index7.html

I went ahead and formed a heavier plate to wrap around the area where the crack occurred (in addition to the stiffeners) to add strength to the area. So far it is holding up well.

Last edited by JandDGreens; Feb 7, 2016 at 01:57 AM.
Reply
Old Feb 7, 2016 | 05:22 PM
  #5  
JohnOH327's Avatar
Thread Starter
Newbie
 
Joined: Nov 2014
Posts: 10
Likes: 0
Model: Cherokee
Default

Track bar is fine. My steering box is actually bolted thru the 1/4 inch plate that holds my bumper and wrench. Box is NOT moving. All tie rod ends are less than a year old. Is it the box?
Reply
Old Feb 7, 2016 | 06:49 PM
  #6  
Jeep Driver's Avatar
Banned
 
Joined: Jan 2014
Posts: 1,054
Likes: 4
Model: Cherokee
Default

Originally Posted by JohnOH327
Track bar is fine. My steering box is actually bolted thru the 1/4 inch plate that holds my bumper and wrench. Box is NOT moving. All tie rod ends are less than a year old. Is it the box?
Sounds like it.
Reply
Old Feb 8, 2016 | 09:23 AM
  #7  
Fred/N0AZZ's Avatar
CF Veteran
 
Joined: Jul 2013
Posts: 7,554
Likes: 17
From: Monett, MO.
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Might want to delete that before a mod does this section for all ages.
Reply
Old Feb 8, 2016 | 02:08 PM
  #8  
XJwonders's Avatar
CF Veteran
Premium Member
 
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
Default

Originally Posted by Fred/N0AZZ
Might want to delete that before a mod does this section for all ages.
too late.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ElMartillo
Modified XJ Cherokee Tech
63
Feb 10, 2016 03:19 PM
Jrozar
Modified XJ Cherokee Tech
14
Feb 5, 2016 08:57 PM
Cory Culver
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Feb 2, 2016 05:30 PM
mmorris
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Feb 2, 2016 03:35 PM
P2120
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
Feb 1, 2016 06:32 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:11 AM.