In my 87, the interior panel for the liftgate likes to come off all the time.
Alot of the tabs that hold the plastic threaded inserts are broken from age, etc. Has anybody come up with a fix for this? I've had it duct taped on the bottom for a while but that never holds very long.

 

u can buy replacement pieces of the push in things at autozon and the screw it in in places,thats what i did

 

The threaded plastic pieces are fine. What they mount to on the panel are broken. I'll post a pic when I get home. It's hard to describe without a picture.

 

ok i kno what u mean now,mine broke to,so i screwed mine in tight in all corners and middle

 

Do you mean you ran bolts or screws or something through the panel and into the fiberglass?

 

Bout inch and a half long self tapping screws in the corners is what\ I Did and I hung 6X9s in Mine

 

x2 he just beat me to the answer

 

u can just screw right thru it all

 

Cool. How is it when you need to pull the panel off?