Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Popping boise on passenger right

Thread Tools
 
Search this Thread
 
Old 09-12-2013, 05:31 PM
  #1  
Senior Member
Thread Starter
 
cherokeelaredo'90's Avatar
 
Join Date: Aug 2011
Location: California
Posts: 604
Likes: 0
Received 1 Like on 1 Post
Year: 1990
Model: Cherokee
Engine: 4.0 i6
Default Popping boise on passenger right

Title says it. Occasionally when I turn left or right pulling into a parking spot I will get a popping noise seemingly from the passenger side. I have a brand new track bar, ball joints, tre's, u joints, hub bearings... I don't know why it would be popping. Did it before replacing everything and after. Maybe the steering box needs to be adjusted? Castle nuts tightened? Throw out your ideas I don't want to just turn my radio up to cover the noise...
Old 09-12-2013, 05:48 PM
  #2  
CF Veteran
 
EZEARL's Avatar
 
Join Date: Aug 2009
Location: WV
Posts: 5,676
Received 298 Likes on 253 Posts
Year: '96
Model: Cherokee
Default

Have you checked the sway bar connections?

Last edited by EZEARL; 09-12-2013 at 05:51 PM.
Old 09-12-2013, 05:56 PM
  #3  
Senior Member
Thread Starter
 
cherokeelaredo'90's Avatar
 
Join Date: Aug 2011
Location: California
Posts: 604
Likes: 0
Received 1 Like on 1 Post
Year: 1990
Model: Cherokee
Engine: 4.0 i6
Default

Originally Posted by EZEARL
Have you checked the sway bar connections?
That could be it. The bushings on the sway bar links are shot. I didn't think it would pop though. I'll disconnect it to see if the pop goes away.
Old 09-12-2013, 06:08 PM
  #4  
Seasoned Member
 
C H E R O K E E 98XJ's Avatar
 
Join Date: Oct 2012
Location: Minnesota
Posts: 414
Likes: 0
Received 3 Likes on 2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 Liter Inline 6
Default

I have some "pops" occasionally over certain bumps and its my sway bar bushings. I disco the bar and it goes away.
Old 09-12-2013, 06:13 PM
  #5  
CF Veteran
 
EZEARL's Avatar
 
Join Date: Aug 2009
Location: WV
Posts: 5,676
Received 298 Likes on 253 Posts
Year: '96
Model: Cherokee
Default

Last week I had a brand new bushing come apart on the right hand lower connection. They'll DEFINITELY pop.
Old 09-12-2013, 06:15 PM
  #6  
Member
 
jburr94xj's Avatar
 
Join Date: Mar 2013
Posts: 148
Likes: 0
Received 1 Like on 1 Post
Default

I get pops from the front and I don't have sway bars
Old 09-12-2013, 06:22 PM
  #7  
CF Veteran
 
EZEARL's Avatar
 
Join Date: Aug 2009
Location: WV
Posts: 5,676
Received 298 Likes on 253 Posts
Year: '96
Model: Cherokee
Default

Can't locate the cause?
Old 09-16-2013, 07:52 AM
  #8  
Seasoned Member
 
ksrummel's Avatar
 
Join Date: Sep 2011
Location: Muncie, Indiana
Posts: 464
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Try the bolt connecting the track bar to the axle....mine pops from there. Think you gotta put a bigger bolt in it
Old 09-16-2013, 12:13 PM
  #9  
Senior Member
Thread Starter
 
cherokeelaredo'90's Avatar
 
Join Date: Aug 2011
Location: California
Posts: 604
Likes: 0
Received 1 Like on 1 Post
Year: 1990
Model: Cherokee
Engine: 4.0 i6
Default

Well I put a steering stabilizer on and I haven't heard the noise since. I'm not going to worry about it too much because I've had multiple people check out my front end and say everything is nice and tight, mainly cause I have all new parts down there.
Old 09-16-2013, 01:12 PM
  #10  
Senior Member
 
bigvig's Avatar
 
Join Date: Nov 2009
Location: Maine
Posts: 904
Received 3 Likes on 3 Posts
Year: 1999 Sport
Model: Cherokee
Engine: I6
Default

Usually a popping or clicking is a bearing of some sort, hub or u-joint.
Old 09-18-2013, 10:54 AM
  #11  
Seasoned Member
 
ksrummel's Avatar
 
Join Date: Sep 2011
Location: Muncie, Indiana
Posts: 464
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Originally Posted by cherokeelaredo'90
Well I put a steering stabilizer on and I haven't heard the noise since. I'm not going to worry about it too much because I've had multiple people check out my front end and say everything is nice and tight, mainly cause I have all new parts down there.
If it is your track bar bolt, it won't matter how tight it is cuz it will still pop if the hole is wallowed out. I'm dealing with this now. I have to get a bigger bolt put in to take up the slop
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
06-17-2023 03:57 PM
cmcl3m0r3
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
05-21-2019 02:38 PM
1998CherokeeXJ
Modified XJ Cherokee Tech
20
11-21-2015 07:49 AM
riparianbarbarian
Introductions
3
10-23-2015 03:57 PM
Jbri22
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-26-2015 04:30 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Popping boise on passenger right



All times are GMT -5. The time now is 11:41 AM.