Just a Simple little Bolt....
#1
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Omaha, Nebraska
Posts: 398
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: Inline 6 4.0 liter
Just a Simple little Bolt....
I need a flipping Metric 12, Grade 8 or higher for my hitch!!!! I cant find it ANYWHERE! If anyone can find this stupid thing i will give you 10,000 brownies!!
#3
CF Veteran
Join Date: Dec 2008
Location: eaton ohio
Posts: 1,533
Likes: 0
Received 0 Likes
on
0 Posts
Year: 93
Model: Cherokee
Engine: 4.0
#5
CF Veteran
Join Date: Dec 2008
Location: eaton ohio
Posts: 1,533
Likes: 0
Received 0 Likes
on
0 Posts
Year: 93
Model: Cherokee
Engine: 4.0
i kno its expensive but its the best i can find at a quick glance, now wheres my brownies lmao
i kno if it gets pretty expensive you could easily make your own nut strips, if you have the bumper off already it would be super easy
i kno if it gets pretty expensive you could easily make your own nut strips, if you have the bumper off already it would be super easy
#6
CF Veteran
Join Date: May 2008
Posts: 3,018
Likes: 0
Received 13 Likes
on
13 Posts
Year: 1988
Model: Cherokee
Engine: AMC242
Have you tried Fastenal yet? You can check the local harware store for inch screws in SAE8, but most hardware store ISO pieces top out at ISO 10.9 (roughly equivalent to SAE6-7, IIRC.) ISO 12.9 comes out a bit higher than SAE8 (and closer to SAE8 than SAE L9.)
Thread
Thread Starter
Forum
Replies
Last Post
investinwaffles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-24-2015 10:05 AM
Chick-N-Picker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-21-2015 06:06 PM
Darin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-20-2015 10:06 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
09-19-2015 07:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)