1994CherokeeCountry

I know this is or should be a fairly simple procedure but I want to make sure I do not end up with a face full of hot antifreeze. So what is the proper procedure whe replacing the lower rad hose on my 94 Jeep Cherokee 4.0l?

sportrider

open the drain **** on the bottom of the radiator and drain it, then change the hose.

djb383

If u let the motor cool (preferably COLD) and remove the plastic air filter box, the bottom rad hose is easily accessible from the top side. Use caution IF u loosen the drain plug on the rad.....they break easily.

hankthetank

i pulled the power steering pump and air box. Made it a cinch. Get a high quality hose with the anti-collapse spring inside it.

freegdr

this way leave pet **** alone just asking for trouble

tjwalker

Agreed. The petcock is not hardy and under-designed. I leave them ALONE.

lurk520

I've actually got a special socket that I ordered online for removing my drain ****.

RTorrez1

Just take off the lower hose and keep your face out of the way!

stev-o

X2

JLK's XJ's

Just do it with the motor cold, no worries. Right-angle channel locks help a bit to remove the spring clamp (if it has stock clamps). Taking the electric fan off is all I've ever done, but it's not much more work to remove the stuff mentioned above to give you a lot of room.

Edit: I wouldn't mess with the radiator drain either, just shove a 5 gallon bucket under there. It's a jeep after all, you can do that