clicking noise in 4wd
Thread Starter
Junior Member
Joined: Dec 2008
Posts: 86
Likes: 0
Year: 1990
Model: Cherokee
Engine: 4.0 Inline 6
when i engage the 4wd low rang there is a clicking noise. i was wondering if anyone had this problem or if anyone has any thoughts on what it might be. thanks
Senior Member

Joined: Feb 2009
Posts: 717
Likes: 0
From: Highlands Ranch Co.
Year: 1985 shell
Model: Cherokee
Engine: 1996 6 cylinder Briggs & Stratton
Start W/ u-joints in front drive shaft. The click that you hear is most likely also present in 4 HI, but you tend to not hear it because you are moving faster ( road noise masking it) It could be axle joints but I would start W/ u-joints
Sounds like stretched t-case chain. More torque from gear reduction in 4-low causes the chain to slip on gears more than in 4-high. crack the case open and see if it is stretched or loose, it will be close to resting on the bottom of the housing if it is badly stretched. If it was U-joints it would be present all the time since the Cherokee does not have unlocking hubs, everything spins all the time. Check both.
Seasoned Member
Joined: Apr 2009
Posts: 344
Likes: 0
From: fresno, ca.
Year: 1991
Model: Cherokee
Engine: 4.0 liter h.o.
my guess would be the chain. thats what mine was. it started as a clicking, then turned into a loud popping noise. seemed like sound was from front axle. this is a very easy fix
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
Nov 26, 2015 12:04 AM
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
Oct 1, 2015 02:58 PM
BluJay
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 26, 2015 10:38 PM
byrns149
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 11, 2015 10:25 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



