So my 4x4 stopped working every sense i did some work on my front axle for my 1989 jeep comanche 4.0. I had to redo the inner axle seals because it was leaking. So when i replaced it and all i also have to replace the gas-gate for the vacuum device that activates the 4x4. But now when i turn it on the part time light goes on but when i push on the gas it turns off. Also it is not working at all last night got stuck as hell because of it. Also i have the money and was thinking of replacing the front 4x4 with hub lock axle. What do yall think? thanks

 

Use a hoseclamp to hold the slide collar over on the front axle. Then disconnect the stupid vacuum actuator.

Problem solved forever. I do that on ALL my pre 91 Jeeps.

 

Sounds like possibly a vacuum leak. Double check your connections or do as diskman said.

 

Diskman which way to i clamp it to the right or left? Could u put a picture up would help alot

 

Or maybe a website i loves this idea but need a visual type thing ha if thats okay

 

https://www.cherokeeforum.com/f2/dan...ct-mod-108127/ 5sec google search

 

https://www.cherokeeforum.com/f51/fr...ss-91-a-38629/

 

thanks guys this should really help ill do it 2day

 

I just "overrode" my vacuum slider last night, really easy. I would just remove the clips on the fork move it over and reinstall, don't use a hose clamp

 

Aint gonna fix the vacuum leak which no dought you have .

 

I did it early today and it worked great! went mudding to the extreme with no problems. but i did have one problem i started a thread on it here the link you all helped me so much i hope you can continue to do so.

https://www.cherokeeforum.com/f2/sha...5/#post2310606