Ok guys, Ive read all the posts about the gauge cluster not working and different solutions. I have changed the cluster with the original, checked IOD fuse, unplugged and checked all pcm connections and cleaned the terminals on the back of both clusters. If this is a ground issue would it be possible to run a jumper to ground from the cluster plug? If so or if it sounds like a good idea does anyone know which wire on each plug would be the ground wires?
Any quick responses would be great as im leaving tomorrow for Twisted Trails Off Road Park and need to have this fixed if possible.

 

connector 1 pin 6
connector 2 pin 9

 

does this sound like a good test for the ground issue? and which is connector 1? door side or radio side? and thanks for the quick response.

 

1 door side
2 passenger side

 

Thanks man!!! Gonna try this first thing in the morning!