Jeep Cherokee Forum - View Profile: PocketsEmpty

PocketsEmpty PocketsEmpty is offline

CF Veteran

About Me

  • About PocketsEmpty
  • My Cherokee
    Transfer Case
    Front Axle
    Dana HP30
    Rear Axle
    C8.25 29-Spline w/ ZJ Discs
    33x12.5x15 Mastercraft Courser MXT
    Lift Specifications
    Zone 3", Iron Rock Offroad double-shear track bar and adjustable LCAs
    Misc Accessories
    Winch bumper, LED Interior, 703s, Flat Flares, Monstaliner interior, tire carrier bumper, etc
  • General
    York, PA
  • Signature
    1998 Cherokee Sport 4.0
    Zone 3" Lift
    Eaton E-locked HP D30
    Detroit TruTrac Ford 8.8
    NP231-SYE w/ AW4

    »Project CHIOBA
    (Build Thread)


Total Posts
Visitor Messages
General Information
  • Last Activity: 03-22-2017 07:03 AM
  • Join Date: 12-28-2012
  • Referrals: 0


Showing Friends 1 to 9 of 9

Visitor Messages

Showing Visitor Messages 1 to 10 of 10
  1. 4OHI6
    11-16-2014 06:26 PM - permalink

    Couple of pics from this weekend. Nice to meet you.


  2. salad
    10-11-2013 01:48 PM - permalink

    Also that's not actually DOS :P The command interpreter is the same but you're using NT
  3. salad
    10-11-2013 01:43 PM - permalink
    Juuuuunk. Where does DOS still live in your world?
  4. salad
    10-11-2013 01:35 PM - permalink
    lol kidding about the MS-DOS crap. Cheers dude
  5. Dr ZEE
    06-09-2013 09:17 PM - permalink
    no build thread, but I have few threads with pictures about some situations I had to deal in the past. If you click my name "Dr ZEE" and then go to STATISTICS and then click "find all threads by Dr ZEE" you can check them out if you have nothing else to do
    Here's link to thread where I had to deal with rusted bolts when I wanted to install new control arms bushings and ended up with cutting and installing new control arms, there are some details on bushings there as well:

    /mike z
  6. Dr ZEE
    06-09-2013 01:00 AM - permalink
    part two:
    Applying PREP&READY is somewhat optional, but if you have it , then don't think twice - apply it. If you have some visable rust, you'll see what it does to rust and you'll be happy that you did apply.
    I used to ignore PREP&READY for the first projects and after I've tried it , now I always apply it as well.
    If you have time to kill you can simply experiment yourself , get a piece of rusty dirty metal , prepair one side and leave as-is the other and paint it over, and then see the result ofter a week or so.
    Or just take my word on it.
    If you are going to be doing por15 for the first time then remember to wear old long sleeve shirt, wear hat, eye-glasses, gloves ... it's a very messy thing to paint under the truck and you will get it all over yourself and you can NOT wash por15 off ... heh heh

    good luck
    write back to me if anything
    /mike z
  7. Dr ZEE
    06-09-2013 12:59 AM - permalink
    From my experience with por 15 (and I've done few projects with it on diffrent trucks, some other garden equipment and some separate parts as well) the preparation of the surface makes BIG diffrence in long run.
    You can cover up with POR15 a dirty unprepaired surfce and it may stick pretty well and look great at first, but soon you'll be able to peal the paint off with your fingers and you get a real mess on your hands, and the biggest problem is that you'll get water trapped under layer of por15 and you'll get pockets of rust which you don't see... - that is a very bad situation.
    So, do your best preparing the surface before applying POR15 anywhere.
    Clean up/wash all the dirt, wirebrush anything you can , you don't have to completely remove all the rust, but remove all the stuff that can fall off, then wash again and BE SURE to degrease it ( at least by washing everything with simple GREEN) or better use POR-15 MARINE-CLEAN (that's what I use).
    read second part next>>>
  8. tssguy123
    04-21-2013 09:14 PM - permalink
    Awesome! I'll be looking for it. No build thread here.
  9. tssguy123
    04-21-2013 12:15 PM - permalink
    Do you have a build thread?
  10. exjay1027
    02-04-2013 04:27 PM - permalink
    I've always wondered the official name of it so thank you haha. Yes it is a great rare color.

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.