What did you do to your Cherokee today?
Seasoned Member
Joined: Mar 2014
Posts: 352
Likes: 0
From: Los Angeles
Year: 1999
Model: Cherokee
Engine: 4.0
Hey guys its been a while since ive been here i havent been on because i lost my 'reply' button but just figured out i can post by 'quoting' someone on my phone app. Anyways i recently did the IRO steering, 35x12.50r15 Goodyear mtr Kevlars, d window wheels, 4.88's, grizzly locker, detroit locker, 30 spline 4340 shafts up front, alloy usa axle seals, new u joints and im waiting on my clayton 3 link to get here next week. Oh and trimmed of course. Going to bumpstop and get some limiting straps once i install the 3 link.


Junior Member
Joined: Apr 2014
Posts: 34
Likes: 0
From: endicott ny
Year: 2000
Model: Cherokee
Engine: 4.0
Seasoned Member
Joined: Jun 2013
Posts: 417
Likes: 1
From: Hickory, NC
Year: 2000
Model: Cherokee(XJ)
Engine: 4.0 L
Hey guys its been a while since ive been here i havent been on because i lost my 'reply' button but just figured out i can post by 'quoting' someone on my phone app. Anyways i recently did the IRO steering, 35x12.50r15 Goodyear mtr Kevlars, d window wheels, 4.88's, grizzly locker, detroit locker, 30 spline 4340 shafts up front, alloy usa axle seals, new u joints and im waiting on my clayton 3 link to get here next week. Oh and trimmed of course. Going to bumpstop and get some limiting straps once i install the 3 link.
Attachment 267955
Attachment 267956
Attachment 267955
Attachment 267956
WELL a while back I posted about smoke billowing out of my dash board
https://www.cherokeeforum.com/f2/i-t...i-fire-205411/
Finally got around to pulling the resistor after it warming up enough to work outside and then getting over the flu.
Pulled the resistor and it had pieces of charred paper towel inside the little cage where obviously some mice had managed to get it into the system. It still worked but hopefully the burned smell will leave the system.
Now I have to replace the clunky sounding heater fan and it will be good to go.
https://www.cherokeeforum.com/f2/i-t...i-fire-205411/
Finally got around to pulling the resistor after it warming up enough to work outside and then getting over the flu.
Pulled the resistor and it had pieces of charred paper towel inside the little cage where obviously some mice had managed to get it into the system. It still worked but hopefully the burned smell will leave the system.
Now I have to replace the clunky sounding heater fan and it will be good to go.
Seasoned Member
Joined: Jun 2013
Posts: 417
Likes: 1
From: Hickory, NC
Year: 2000
Model: Cherokee(XJ)
Engine: 4.0 L
::CF Administrator::





Joined: Feb 2011
Posts: 14,479
Likes: 805
From: Blunt, South Dakota
Year: 97
Model: Cherokee (XJ)
Engine: 4.6 stroker
I gotta tell ya, I'm really thinking about ripping up the carpet, and cutting a hole in the rear, and using a larger piece of sheet metal, and some sealant and screws, instead of removing the tank, bumper and skid plate...anyone ever done this or seen it done?
CF Veteran
Joined: Nov 2013
Posts: 1,347
Likes: 0
From: Wetumpka, AL
Year: 1987
Model: Cherokee
Engine: 4.0
Better than gear oil....LMAO
I gotta tell ya, I'm really thinking about ripping up the carpet, and cutting a hole in the rear, and using a larger piece of sheet metal, and some sealant and screws, instead of removing the tank, bumper and skid plate...anyone ever done this or seen it done?
I gotta tell ya, I'm really thinking about ripping up the carpet, and cutting a hole in the rear, and using a larger piece of sheet metal, and some sealant and screws, instead of removing the tank, bumper and skid plate...anyone ever done this or seen it done?
::CF Administrator::





Joined: Feb 2011
Posts: 14,479
Likes: 805
From: Blunt, South Dakota
Year: 97
Model: Cherokee (XJ)
Engine: 4.6 stroker
Beach Bum
Joined: Jul 2011
Posts: 6,123
Likes: 22
From: Cape Hatteras, North Carolina
Year: 2000 WJ
Model: Grand Cherokee
Engine: 4.0
::CF Administrator::





Joined: Feb 2011
Posts: 14,479
Likes: 805
From: Blunt, South Dakota
Year: 97
Model: Cherokee (XJ)
Engine: 4.6 stroker


