Jeep Cherokee Forum
Tapped the hole for the shoulder bolt
Tapped the hole for the shoulder bolt
0 2022/05/27 13:38:50
Ground down the factory piviot point and drilled it out
Ground down the factory piviot point and drilled it out
0 2022/05/27 13:38:43
For anyones whos curious, I got these at Home Depot. Lowes has full sheets but I could not fit them in my car so these will do
For anyones whos curious, I got these at Home Depot. Lowes has full sheets but I could not fit them in my car so these will do
0 2022/05/14 20:56:12
These were the best three panels they had in stock regardless of the minor exposure
These were the best three panels they had in stock regardless of the minor exposure
0 2022/05/14 20:56:06
The fronts have a lot of work to do before puting a new backing behind them
The fronts have a lot of work to do before puting a new backing behind them
0 2022/05/14 20:47:51
All stapes were removed and the backing was removed.
All stapes were removed and the backing was removed.
0 2022/05/14 20:47:44
These old panels are super crusty and aged with years of himan filth
These old panels are super crusty and aged with years of himan filth
0 2022/05/14 20:47:18
0 2022/05/14 20:43:40
0 2022/05/10 07:45:29
0 2022/05/10 07:43:26
0 2022/04/23 11:23:56
0 2022/04/20 16:54:32
0 2022/04/19 09:04:04
0 2022/04/19 09:03:16
0 2022/04/19 09:02:38
0 2022/04/19 09:01:35
0 2022/04/07 20:27:28
0 2022/04/07 20:18:57
0 2022/04/07 20:18:50
0 2022/04/07 20:18:44
0 2022/04/07 20:17:36
0 2022/04/07 20:17:29
Gear selector range senser from the J case installed into the AMG housing.
Gear selector range senser from the J case installed into the AMG housing.
0 2022/04/01 06:43:04
J speedo installed in the AMG housing. The geometry is slightly different, but I'll touch up more on this later.
J speedo installed in the AMG housing. The geometry is slightly different, but I'll touch up more on this later.
0 2022/04/01 06:42:48
J case with speedo installed.
J case with speedo installed.
0 2022/04/01 06:42:36
0 2022/04/01 06:40:07
Heres it mocked up together. The internal diameter of the bearing is the same on the HD and the AMG.
Heres it mocked up together. The internal diameter of the bearing is the same on the HD and the AMG.
0 2022/04/01 06:39:34
The size and shape is a carbon copy of the HD tailcone. If this took a gasket if would fit without problems.
The size and shape is a carbon copy of the HD tailcone. If this took a gasket if would fit without problems.
0 2022/04/01 06:38:51
The HD SYE fits up perfectly to the AMG housing.
The HD SYE fits up perfectly to the AMG housing.
0 2022/04/01 06:38:00
You can see where the tailcone fit because of the old silicone left by the previous owner.
You can see where the tailcone fit because of the old silicone left by the previous owner.
0 2022/04/01 06:36:59
The SYE kit bolts thread right into the AMG housing, meaning the thread pitch is the same.
The SYE kit bolts thread right into the AMG housing, meaning the thread pitch is the same.
0 2022/04/01 06:36:21
0 2022/04/01 06:29:37
0 2022/04/01 06:29:25
0 2022/04/01 06:29:02
0 2022/04/01 06:28:33
0 2022/03/31 18:02:55
0 2022/03/31 18:02:39
0 2022/03/30 17:30:24
0 2022/03/30 17:30:19
0 2022/03/28 07:13:55