Jeep Cherokee Forum
0 2015/11/01 20:22:47
0 2015/11/01 20:23:11
0 2015/11/01 20:30:05
0 2015/11/01 20:32:24
0 2015/12/18 20:54:40
had to seal it up,, used long hair bondo
had to seal it up,, used long hair bondo
0 2015/12/18 20:55:06
Well I did not take many pictures while I was doing the painting. Here is how the paint came out.
Well I did not take many pictures while I was doing the painting. Here is how the paint came out.
0 2015/12/18 21:10:55
Water-jet cut the fenders with the Cummins name, courtesy of "Dirtbound"
Water-jet cut the fenders with the Cummins name, courtesy of "Dirtbound"
0 2015/12/18 21:17:19
Water-jet cut the Cummins name in the fenders courtesy of "Dirtbound"
Water-jet cut the Cummins name in the fenders courtesy of "Dirtbound"
0 2015/12/18 21:20:14
0 2015/12/18 21:26:03
0 2015/12/18 21:29:59
0 2015/12/18 21:30:22
Samurai of course but I liked the concept
Samurai of course but I liked the concept
0 2015/12/22 00:33:14
0 2015/12/22 00:34:14
0 2016/02/28 21:12:09
As soon as I sealed up the rear fenderwells I got busy with paint, lots of progress, sometimes I don't stop long enough to take pictures.
As soon as I sealed up the rear fenderwells I got busy with paint, lots of progress, sometimes I don't stop long enough to take pictures.
0 2016/02/29 09:51:52
0 2016/03/12 19:32:54
Parts I made for the sides just forward of the rear slider/hitch.
Parts I made for the sides just forward of the rear slider/hitch.
0 2016/03/12 19:33:27
0 2016/03/12 19:33:47
I needed to make some end caps
I needed to make some end caps
0 2016/03/12 19:34:37
I cut these from a end cap I found at the local metal shop, they did not have any pre-made in 1 1/4 inch diameter so I had to get a bit creative
I cut these from a end cap I found at the local metal shop, they did not have any pre-made in 1 1/4 inch diameter so I had to get a bit creative
0 2016/03/12 19:35:19
0 2016/03/12 19:39:54
0 2016/03/12 19:40:18
0 2016/03/12 19:40:41
0 2016/03/12 19:41:13
0 2016/03/12 19:42:24
0 2016/03/12 19:53:33
0 2016/03/18 09:45:21
0 2016/03/24 22:08:47
0 2016/03/24 22:13:42
0 2016/03/24 22:21:18
0 2016/03/24 22:24:23
0 2021/09/15 23:49:33
0 2021/09/15 23:50:30
0 2021/10/05 21:19:27
This is mounted in the storage/hatch/box I built that takes the place of the window on the drive side.
This is mounted in the storage/hatch/box I built that takes the place of the window on the drive side.
0 2021/10/08 20:27:01
Also in the storge area.
Also in the storge area.
0 2021/10/08 20:27:19
all seats re-upholsterd soon,,,I hope..
all seats re-upholsterd soon,,,I hope..
0 2021/10/08 20:28:07
Aluminum Storge compartment to the left of this 3rd seat that is centered. Directly behind the seat is the Wytner tall and narrow refirigerator and freezer, WORKS PERFERCT!
Aluminum Storge compartment to the left of this 3rd seat that is centered. Directly behind the seat is the Wytner tall and narrow refirigerator and freezer, WORKS PERFERCT!
0 2021/10/08 20:28:23
0 2021/10/08 20:48:30