Jeep Cherokee Forum
Found it in Idaho on CL, Shipped it home to San Diego.
Found it in Idaho on CL, Shipped it home to San Diego.
0 2015/02/04 22:31:49
Shipped it home to San Diego, day one in the driveway
Shipped it home to San Diego, day one in the driveway
0 2015/02/04 22:32:18
Found it in Idaho on CL, had to have it, Factory Diesel, 2.1 Renault!
Found it in Idaho on CL, had to have it, Factory Diesel, 2.1 Renault!
0 2015/02/04 22:35:58
0 2015/02/04 22:41:23
0 2015/02/04 22:41:50
0 2015/02/08 21:30:00
0 2015/02/08 21:31:38
0 2015/02/08 21:37:23
Was not my style, so, its outta here. factory rear seat is going to go back in for now
Was not my style, so, its outta here. factory rear seat is going to go back in for now
0 2015/02/08 21:37:59
It had a hinge and a lift lid to hide stuff but no bottom, also box/storage interfered with moving the seat back all the way
It had a hinge and a lift lid to hide stuff but no bottom, also box/storage interfered with moving the seat back all the way
0 2015/02/08 21:38:13
No turning back now. Sold the 2.1 Renault drivetrain to a local guy a couple of days ago. The Cummins drivetrain arrived the day before, from Indiana.
No turning back now. Sold the 2.1 Renault drivetrain to a local guy a couple of days ago. The Cummins drivetrain arrived the day before, from Indiana.
0 2015/02/23 21:11:08
Its here!!!
Its here!!!
0 2015/03/04 20:49:42
A nudder view
A nudder view
0 2015/03/05 21:29:56
Ruff Stuff arrived
Ruff Stuff arrived
0 2015/03/07 14:20:01
After the power wash,,,,Generally I am finding that this Cherokee is in great shape, not been abused off road,,,and no rust anywhere! I get to strengthen it up, so it will be good for the mild abuse I intend for it.
After the power wash,,,,Generally I am finding that this Cherokee is in great shape, not been abused off road,,,and no rust anywhere! I get to strengthen it up, so it will be good for the mild abuse I intend for it.
0 2015/03/07 14:23:49
Unibody "frame" rails are prepped for the stiffeners.
Unibody "frame" rails are prepped for the stiffeners.
0 2015/03/07 14:24:47
Lower control mounts also have to come off to get the most out of the stiffening plates....so maybe its time to put the long arm kit on now. OR ..... possibly weld it back on, after the stiffener plates are on and do the long arm upgrade later,, Have not decided.
Lower control mounts also have to come off to get the most out of the stiffening plates....so maybe its time to put the long arm kit on now. OR ..... possibly weld it back on, after the stiffener plates are on and do the long arm upgrade later,, Have not decided.
0 2015/03/07 14:26:33
After the power wash...... Generally I am finding that this Cherokee is in great shape, only minor damage for a small amount of off road use and no rust anywhere!!
After the power wash...... Generally I am finding that this Cherokee is in great shape, only minor damage for a small amount of off road use and no rust anywhere!!
0 2015/03/07 14:39:38
Unibody "Frame" rails prepped for the stiffeners.
Unibody "Frame" rails prepped for the stiffeners.
0 2015/03/07 14:41:43
Lower control mounts are going to have to come off to get the most out of the frame stiffeners....time to decide if the long arm kit goes on now or just weld the mounts back on temporarily.
Lower control mounts are going to have to come off to get the most out of the frame stiffeners....time to decide if the long arm kit goes on now or just weld the mounts back on temporarily.
0 2015/03/07 14:42:33
0 2015/03/07 14:45:28
Unibody "frame" prepped for stifffeners
Unibody "frame" prepped for stifffeners
0 2015/03/07 14:45:43
0 2015/03/07 14:45:52
Power wash, Generally I am finding the Cherokee is in great shape, not abused off road and no rust anywhere!!
Power wash, Generally I am finding the Cherokee is in great shape, not abused off road and no rust anywhere!!
0 2015/03/07 14:48:20
Unibody "frame" rails prepped for the stiffeners
Unibody "frame" rails prepped for the stiffeners
0 2015/03/07 14:50:08
Unibody "frame" rails prepped for the stiffeners
Unibody "frame" rails prepped for the stiffeners
0 2015/03/07 14:52:25
Unibody "frame" rails prepped for the stiffeners
Unibody "frame" rails prepped for the stiffeners
0 2015/03/07 14:53:39
Unibody "frame" rails prepped and ready for stiffeners
Unibody "frame" rails prepped and ready for stiffeners
0 2015/03/07 14:56:27
Unibody "frame" rails prepped and ready for the stiffeners
Unibody "frame" rails prepped and ready for the stiffeners
0 2015/03/07 14:57:43
Unibody "frame" rails prepped and ready for the stiffeners
Unibody "frame" rails prepped and ready for the stiffeners
0 2015/03/07 15:00:00
Unibody "frame" rails prepped and ready for the stiffeners
Unibody "frame" rails prepped and ready for the stiffeners
0 2015/03/07 15:06:07
0 2015/03/07 15:08:29
Lower mounts need to come off to get the most out of the stiffeners,,,,time to decide to go long arm.. OR Just weld mounts back on for now and do the long arm stuff later.
Lower mounts need to come off to get the most out of the stiffeners,,,,time to decide to go long arm.. OR Just weld mounts back on for now and do the long arm stuff later.
0 2015/03/07 15:10:26
Cut out a cardboard template. Thinking about tying in the roll cage into boxed frame by following the fender and spring support up at an angle, then turn it toward the firewall.
Cut out a cardboard template. Thinking about tying in the roll cage into boxed frame by following the fender and spring support up at an angle, then turn it toward the firewall.
0 2015/03/14 12:17:16
0 2015/03/14 12:18:27
First, adding strength to the inner surfaces of the engine bay .90 wall on the face,, then the 120 wall sheets have been broke to give them a 90% bend to create a 2" X 6" ,,Those are planned for overlaps to create a grid of strength.
First, adding strength to the inner surfaces of the engine bay .90 wall on the face,, then the 120 wall sheets have been broke to give them a 90% bend to create a 2" X 6" ,,Those are planned for overlaps to create a grid of strength.
0 2015/03/14 12:23:54
The weak front U shaped channel is coming off to be replaced by a 2 X 6 .120 wall rectangular tube.
The weak front U shaped channel is coming off to be replaced by a 2 X 6 .120 wall rectangular tube.
0 2015/03/14 12:30:25
0 2015/03/14 12:31:06
The front factory U shaped channel is coming out to be replaced by a .120 wall rectangular tube,,2 X 6.,,,an extension of the Battering Ram
The front factory U shaped channel is coming out to be replaced by a .120 wall rectangular tube,,2 X 6.,,,an extension of the Battering Ram
0 2015/03/14 12:35:39
0 2015/03/14 12:37:57