CF Veteran
Quote:
Yes we could stroke it... but that block in my garage for my jeep
and we already have a lot of the parts.
The manifold isn't that hard to make. I have 2 cracked ones sitting in the garage, just cut 3 inchs down the pipe and log it... not difficult if you know what you're doing. It will take a few hours of actual work, not planing... and it will be a log style
Originally Posted by hi im adam
Where I am at, it is rare to have temps over 90 degrees ever.Yes we could stroke it... but that block in my garage for my jeep
and we already have a lot of the parts.
The manifold isn't that hard to make. I have 2 cracked ones sitting in the garage, just cut 3 inchs down the pipe and log it... not difficult if you know what you're doing. It will take a few hours of actual work, not planing... and it will be a log style
go ahead, build a manifold that will actually fit under the intake manifold with a turbo, install it on the jeep, and get it running.
then, you can post "
"
CF Veteran
Quote:
not sure what he is running for a turbo... but I know a local guy running 6 psi on a t3/t4 hybrid and putting down around 300hp (at the wheels)Originally Posted by jeepxj19
there was a local guy selling a turbo'd xj a while back and i think it was running about 8-9lbs of boost, to me yea it would be cool but not really worth it if ur only running 8 lbs of boost. better off installing a stroker.
CF Veteran
Quote:
then, you can post " "
the guy I know just built a cross over pipe that feeds to a t3 flange on the passenger sideOriginally Posted by N20jeep
go ahead, build a manifold that will actually fit under the intake manifold with a turbo, install it on the jeep, and get it running.then, you can post "
"
Quote:
then, you can post " "
just so we are on the same page...Originally Posted by N20jeep
go ahead, build a manifold that will actually fit under the intake manifold with a turbo, install it on the jeep, and get it running.then, you can post "
"
CF Veteran
Quote:
if you did that, that is VERY nice workOriginally Posted by hi im adam
just so we are on the same page...
Newbie
Quote:
then, you can post " "
x2. Originally Posted by N20jeep
go ahead, build a manifold that will actually fit under the intake manifold with a turbo, install it on the jeep, and get it running.then, you can post "
"
Quote:
That pic is from Naxja and took more than a few hours to fab up. Originally Posted by hi im adam
just so we are on the same page...
CF Veteran
Quote:
That pic is from Naxja and took more than a few hours to fab up.
so he just stole the pic?Originally Posted by trs80
That pic is from Naxja and took more than a few hours to fab up.
CF Veteran
CF Veteran
Quote:
You claiming you built that?Originally Posted by hi im adam
just so we are on the same page...
adding to the link above is the build thread for the turbo system he did:
http://www.naxja.org/forum/showthread.php?t=1031285
http://www.naxja.org/forum/showthread.php?t=1031285