Originally Posted by hi im adam

Where I am at, it is rare to have temps over 90 degrees ever.

Yes we could stroke it... but that block in my garage for my jeep
and we already have a lot of the parts.

The manifold isn't that hard to make. I have 2 cracked ones sitting in the garage, just cut 3 inchs down the pipe and log it... not difficult if you know what you're doing. It will take a few hours of actual work, not planing... and it will be a log style

Originally Posted by jeepxj19

there was a local guy selling a turbo'd xj a while back and i think it was running about 8-9lbs of boost, to me yea it would be cool but not really worth it if ur only running 8 lbs of boost. better off installing a stroker.

Originally Posted by N20jeep

go ahead, build a manifold that will actually fit under the intake manifold with a turbo, install it on the jeep, and get it running.

then, you can post " "

Originally Posted by N20jeep

go ahead, build a manifold that will actually fit under the intake manifold with a turbo, install it on the jeep, and get it running.

then, you can post " "

Originally Posted by hi im adam

just so we are on the same page...

Originally Posted by N20jeep

go ahead, build a manifold that will actually fit under the intake manifold with a turbo, install it on the jeep, and get it running.

then, you can post " "

Originally Posted by hi im adam

just so we are on the same page...

Originally Posted by trs80

That pic is from Naxja and took more than a few hours to fab up.

Originally Posted by hi im adam

just so we are on the same page...

Originally Posted by ericfx1984

so he just stole the pic?