Nobudgetxj

So I have had this fan laying around for a while now and finally decided to install it. Now all I need is a wiring diagram with some detailed pics. I've found a few but they are pretty confusing. Anybody have any diagrams for dummies?

bryweb

I found this but added the note in RED - The relays are kicked on (turning the fans on) when the ground is completed (through the switches)

bryweb

Like this one.

ZJMAX

Here is what I did on mine. https://www.cherokeeforum.com/f5/fini...nstall-195441/





Max

XJ TENN

I'm going to use this method except I'm going to use a temp switch out of a f-150 for the low speed switch and use the stock aux fan for my high speed switch. That way low speed will come on at normal operating temp and high speed turns on at high temp or with A/C along with the stock aux e-fan.

Nobudgetxj

Thanks for the info guys , I was going to try and get it all hooked up this morning but I locked my ONLY key in my jeep.. In the ignition turned on and drained my battery ..great way to start a project

Nobudgetxj

I have read in a few different places that some people have soldered the wires to the relays?? Anyone ever done this? Just wanted a little info before I hook it all up

XJ TENN

What would be your plan if the relay goes bad?

Nobudgetxj

Im not going to solder I was just wanting to know if there was better connection doing so or any other benefits, negative effects? I'm trying to just wire it to a toggle for now. Anyone have any pictures of the actual relays and fan wired up? I appreciate the diagrams but I need to see actual photos and I can't find any besides top views of the relays

Nobudgetxj

*

Nobudgetxj

Finally got everything hooked up and got the low speed hooked up to factory wires just changed the factory relay to a 40 amp so it switches on automatically and with the toggle switch and everything worked great!! I found a super simple diagram as well I'll upload pics soon thanks a lot guys