can you go into further detail as to how i would mess it up and ho to avoid? i really dont want another leak!

how much does yours leak?

 

Make sure the rear axle is shimmed correctly and the yoke is straight with the drive-shaft.
I just got a front driveshaft from e-bay $50 delivered. It bolted right up as a rear driveshaft.
A manual trans is more narrow and requires a longer shaft. Also the 231 is narrower and takes a longer shaft than the 242.

 

Anyone using these?

 

Im not sure the number i just brought one of my bolts in with me and found an identical one.





Mine is seeping where the yoke goes into the sye . Just be careful when pulling the yoke out and putting it back in. If it leaks a little no biggie. The seal is only like 4 bucks and you don't need to.open the sue back up to get to it. Just have to pull the driveshaft and the yoke off..do a seal puller and.pop the new seal in

 

yes, i am. there the same size bolts with the same thread. only difference is that it doesnt take a wrench, it takes allen key. i found it at ACE hardware store, all black, grade8 hardware. fits perfectly and ill be runnin them for a while. dont bother with advance or napa or any other shop. these are grade8 quality bolts that cost me .55 each. awesome deal

 

I'll go check it out today, thanks!

 

no problem