sway bar link
11-08-2013, 05:36 AM
#1
Member
Thread Starter
Join Date: Apr 2013
Location: Cincinnati Ohio
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: V6
sway bar link
I did a 3" lift and removed/ broke my stock front end sway bar link when I removed it to do my lift . Now I kinda would like to have it back.
My question is . can I use a stock link for a 3" lift or do I need to get a longer one to fit the lift ?
Next question is. If I do need a longer one can I get one off another car in the junk yard?
My question is . can I use a stock link for a 3" lift or do I need to get a longer one to fit the lift ?
Next question is. If I do need a longer one can I get one off another car in the junk yard?
11-08-2013, 07:15 AM
#4
Member
Join Date: May 2012
Location: Covington Ha
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
https://www.cherokeeforum.com/f2/che...t-guide-16371/ In here it says xj links are good to 3 inches and zj for 4inches
11-08-2013, 11:34 AM
#6
Senior Member
Join Date: May 2013
Location: Maryland
Posts: 681
Likes: 0
Received 28 Likes
on
23 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
At 3-4 inches of lift the stock links kept wearing out the bushings. Other than that they did what they are supposed to do. Autozone has lifetime warranty on them and I confirmed with the counter that I could return them for worn bushings. I ended up going a little higher and replacing stock with zone 4.5" links. No more worn bushings.
Thread
Thread Starter
Forum
Replies
Last Post
mmsobyak
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-29-2015 06:46 AM
terzdesign
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-22-2015 10:39 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
09-19-2015 07:55 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-13-2015 02:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)