okay so i got my font coil spring spacers out, i got my lower control arm disconnected, and i need to get my spring back in withe a 3in spacer, i cant get it back in ! any tips how?

also does the spacer need the go above or below the bump stop?

 

Spacer goes above the coil. Keep dropping the axle, disconnect your shocks.

 

First I would re connect the control arms before putting the spring in, easier now. Sway bar and hocks is all you should need to unbolt for the axel to drop enough for a spacer. Sometimes it helps to unbolt the trackbar at the axeel. Have a buddy stand on the end of the hub while you insert the spacer and spring. Or use a bottle jack to push the axel down

 

Use a spring compresser rental from Advance Auto Makes the job much easier. have fun.

 

X's 2

 

autozone also rents them for real cheap.