Regearing stock axles
#1
Member
Thread Starter
Join Date: Sep 2018
Posts: 214
Likes: 0
Received 7 Likes
on
6 Posts
Year: 95
Model: Cherokee (XJ)
Engine: 4.0L
Regearing stock axles
I am planing on regearing my 95 XJ to 4.56 or 4.88 since I am running 35s on ny stock axles. I was reading about it and found out that I might need to change the front carrier if I put either of those gear ratios on.
My questions is, would I really need to change carriers on the dana 30 or is there any other way around doing that.
I have 35s and a 6.5 inch lift. Everything else is stock.
Please give some advice.
My questions is, would I really need to change carriers on the dana 30 or is there any other way around doing that.
I have 35s and a 6.5 inch lift. Everything else is stock.
Please give some advice.
#2
CF Veteran
Yes you need a carrier for a 3.73 and up gear ratio in the Dana 30.
http://www.ronsmachiningservice.net/...73-up-706008x/
http://www.ronsmachiningservice.net/...73-up-706008x/
Thread
Thread Starter
Forum
Replies
Last Post
96rokee
Modified XJ Cherokee Tech
5
04-19-2013 08:28 PM
FOXxX
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
07-13-2010 04:01 PM
Iant333
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
10-01-2009 08:26 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)