Pin emulator using sway bar link
Thread Starter
Junior Member
Joined: Apr 2012
Posts: 89
Likes: 7
Model: Cherokee
Pin emulator using sway bar link
Anyone done this?
http://www.lunghd.com/Tech_Articles/.../Rear_BPEs.htm
I am kinna skeptical because the swaybar link only allow the shocks to move a direction 90 degrees opposite to the original pin mount direction. The movement will seems to stress the bushing on the shocks.
What do you guys think?
http://www.lunghd.com/Tech_Articles/.../Rear_BPEs.htm
I am kinna skeptical because the swaybar link only allow the shocks to move a direction 90 degrees opposite to the original pin mount direction. The movement will seems to stress the bushing on the shocks.
What do you guys think?
Junior Member
Joined: Feb 2012
Posts: 59
Likes: 0
From: east texas
Year: 98
Model: Cherokee
Engine: 4.0
Yeah. I had a bolt break on both sides and I ended up welding the sway bar links in. I dont remember the angle being that bad, ill try to get a picture when I get off.
Thread
Thread Starter
Forum
Replies
Last Post
mmsobyak
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 29, 2015 06:46 AM
terzdesign
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 22, 2015 10:39 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
Sep 19, 2015 07:55 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 13, 2015 02:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)