Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

oil pressure dropping

Thread Tools
 
Search this Thread
 
Old Jan 16, 2012 | 10:55 PM
  #1  
94cherokeeman's Avatar
Thread Starter
CF Veteran
 
Joined: May 2011
Posts: 3,380
Likes: 0
From: Partlow, va
Year: 1994
Model: Cherokee
Engine: 4.0 i6, 307 injectors
Default oil pressure dropping

How do I know if my oil pump is bad? Before when I drive 55mph my oil pressure was 40psi now its about 30
Reply
Old Jan 16, 2012 | 11:03 PM
  #2  
dukie564's Avatar
☠ CF Sheriff ☠
Premium Member
 
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
Default

how is this advanced tech?

I would verify those numbers with a mechanical gauge - could just be a lazy sensor

Good Readings:
*Not less than 13 psi at HOT idle
*Between 37-75 psi over 1600 rpms
Reply
Old Jan 17, 2012 | 06:27 AM
  #3  
kjc's Avatar
kjc
CF Veteran
 
Joined: Aug 2011
Posts: 1,031
Likes: 4
From: Blue Springs, MO
Year: 1993
Model: Grand Cherokee
Engine: 4.0L Laredo
Default

Originally Posted by 94cherokeeman
How do I know if my oil pump is bad? Before when I drive 55mph my oil pressure was 40psi now its about 30
Unless it's at 0 psi, the only way to know it's bad is by removing it and checking tolerances. Before I did that, i'd check for leaks around your oil pressure sending unit. It could still be bad w/o leaking, but in my experience they leak
Reply
Old Jan 17, 2012 | 06:50 AM
  #4  
94cherokeeman's Avatar
Thread Starter
CF Veteran
 
Joined: May 2011
Posts: 3,380
Likes: 0
From: Partlow, va
Year: 1994
Model: Cherokee
Engine: 4.0 i6, 307 injectors
Default

There no leak there im gunna try replacing it and see
Reply
Old Jan 18, 2012 | 04:07 PM
  #5  
94cherokeeman's Avatar
Thread Starter
CF Veteran
 
Joined: May 2011
Posts: 3,380
Likes: 0
From: Partlow, va
Year: 1994
Model: Cherokee
Engine: 4.0 i6, 307 injectors
Default

I replaced the oil pressure sending unit and my oil pressure is very low what is my next step
Reply
Old Jan 19, 2012 | 02:29 AM
  #6  
Slimgoaty's Avatar
Senior Member
 
Joined: Dec 2011
Posts: 922
Likes: 1
From: Centralia, Wa
Year: 1997
Model: Cherokee
Engine: 4.0
Default

Originally Posted by 94cherokeeman
I replaced the oil pressure sending unit and my oil pressure is very low what is my next step
Did you replace with a OEM Jeep sensor? Most any other sensor will give you problems.
Reply
Old Jan 19, 2012 | 04:30 AM
  #7  
94cherokeeman's Avatar
Thread Starter
CF Veteran
 
Joined: May 2011
Posts: 3,380
Likes: 0
From: Partlow, va
Year: 1994
Model: Cherokee
Engine: 4.0 i6, 307 injectors
Default

Yea I did I use most jeep parts
Reply
Old Jan 19, 2012 | 05:37 AM
  #8  
cruiser54's Avatar
::CF Moderator::
 
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

I found this interesting. Easy, too.

http://www.jeepforum.com/forum/f19/4...fixed-1304679/
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
Jan 31, 2024 04:58 PM
nrwphoto
Modified XJ Cherokee Tech
42
Apr 1, 2022 07:49 AM
idahomike
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
84
Jun 17, 2016 07:39 AM
Pathfinder74
Introductions
12
Sep 16, 2015 04:43 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
Sep 13, 2015 06:06 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:17 AM.