I have an HD headlight wiring harness on the way, and I've got a spare set of headlights that I can cut up to make housings. I'm willing to buy other housings to butcher, and I am willing to make room behind the headlights on the XJ.

I've done a bit of research, checked out ebay, ddmtuning, HIDcountry, etc.

A couple of the projector assemblies I wanted are not available. So I have to find something else.

Does anyone have suggestions as to what I should get? Links preferred.

I'm not looking to spend $850-$1200, thinking about $200 should be more than enough for a high quality set.

Any suggestions or input?

 

http://www.norcalmr2.com/pegasus/
AoA suggested these^^

Any opinions on them?

 

Other useful threads:

https://www.cherokeeforum.com/f67/hi...stions-119353/

https://www.cherokeeforum.com/f2/h4-conversion-118783/

 

Try amazon they have then

 

i did these a few months ago and havnt regret!!\

https://www.cherokeeforum.com/f58/7x6...-build-112158/

 

From my understanding you didn't like the projectors you bought, and the blue angel eyes are out if stock anyway.

I did read through your build, though, and have used it for reference. I appreciate your information greatly!!

 

i dont know why you said that i dont like them if this is my best mood on my 6 years of owning my jeep , i just said that did not liked the look of the combination of green and blue angel eyes that came with the shrouds but you can buy them any color on ebay , i just bought a pair of white ones and they will be looking like the picture below, that is the setup i ordered but they told me that those where over ...

 

I love the looks of those... Am I the only one that Sees the movie TRON when looking at that???

I found which unit I am using

 

yeah thats what im telling you , the setup i got looked like a sandwich neon sing, it looked awful but this ones look nice , you just have to buy the ccfl lamp , and replace the one you dont like , this only costs 10 us on ebay , so they are pretty cheap i have not receive them yet cause they come from Hong Kong so they will delay !!!

 

My bad, I have been following a few HID/Projector threads. I must've confused your thread with a similar write up where they said the projector they used was not of good quality.

I would have wanted the plain blue halos, but again, they are no longer available.

Either way, I found a direct swap that I decided to try. Less work, less hassle.

 

Is it high and low beam on this projectors?

 

Depends on which ones you go with.

High/lows are available, but you'll have to wait.

 

and why is that , if i see the same ones i bought on ebay selling all the time??

 

Why is what?

I stated I found a set that is a direct swap. The next post asked if there were high/lows available, I'm guessing he was asking about the direct swap ins that I found.

And the answer to that question is: depends on which kit you go with.

If you build the projector like you did, it would depend on which projector you get. And I'm sure you can find a projector with highs and lows.

However, if you buy the direct swap kit like I did, you will have to wait until next month when they become available...because they are not available yet from my source.



Make sense?

 

yeah , its been my bad , i thought you said that the projectors that i used where no longer avaliable , didnt , noticed you where talking about the other ones . sorry..