1993 XJ 4x4. Need help. I have a new Master Cylinder, Booster, all have been bled fully, no leaks anywhere, still no brakes, what else could be wrong?

 

Did you adjust your rear drums so they're just lightly dragging?

 

Yep, sure did.

 

Did you bleed the Prop valve ?

 

No, I did not but I will...I'm getting great fluid flow to all 4 wheels. Would I still need to bleed it?

 

Got the front calipers swapped left to right ?

 

They have never been removed since I have owned the jeep and that's been almost 3 years

 

Still no brakes? None at all? How did you bleed the master? Did you adjust the screw on the booster out to where the old one was?

 

I bought a kit to bleed the master while it was on the jeep. Adjusted the screw, yes. I just removed the master and had it warrantied so I'm going to replace it with the new one, bleed everything again and I will get back on this when I finish.

 

FIXED! Come to find out, the adjustment screw in the booster was 1/4" too short, replaced it with a longer one and I now have better brakes than I ever have had on this Jeep. Thank you all for trying to help me with this problem, greatly appreciated.