My version of a cowl snorkle
Junior Member
Joined: Sep 2013
Posts: 47
Likes: 0
From: Ohio
Year: 1999
Model: Cherokee
Engine: 4.0
Funny I found this thread, I did this to mine last year and its held up well!
http://www.flickr.com/photos/unruinable/9885378673/http://www.flickr.com/photos/unruinable/9885378673/]Untitled[/url, on Flickr
http://www.flickr.com/photos/unruinable/9885378673/http://www.flickr.com/photos/unruinable/9885378673/]Untitled[/url, on Flickr
Thread Starter
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
the intake tube is just RTV'd into the hole in the box (tight fit). Where it meets the cowl i just drilled a 3" hole and stuffed the intake elbow in (there is a lip that holds it in place)
Member
Joined: Oct 2009
Posts: 105
Likes: 0
From: near Columbia mo
Year: 1997
Model: Cherokee
Engine: 4.0
what I am going to use
this is what I am going to use. not bad for 25 tacos!
I hope to cut out the part of the air box and use the part in the lower corner for an attachment
thanks for the post. what an idea!
I hope to cut out the part of the air box and use the part in the lower corner for an attachment
thanks for the post. what an idea!
Junior Member
Joined: Sep 2013
Posts: 31
Likes: 1
From: Central PA
Year: 1994
Model: Cherokee
Engine: 4.0
This works very well.. It needs some tweaking but other than that a great way to save some bucks.
I just posted a tread on this and the aftermath of this approach to this mod.
I just posted a tread on this and the aftermath of this approach to this mod.
Member
Joined: Jun 2013
Posts: 107
Likes: 0
From: middlebury vt
Year: 1996
Model: Cherokee
Engine: 4.0 6cyl
Member
Joined: Jun 2013
Posts: 107
Likes: 0
From: middlebury vt
Year: 1996
Model: Cherokee
Engine: 4.0 6cyl
found it never mind good thread man. I'm eventually gonna either go passenger side with a cone filter and no air box or a pillar snorkel its my DD but I like to go over kill
Junior Member
Joined: Sep 2013
Posts: 35
Likes: 0
From: Olathe,KS
Year: 1995
Model: Cherokee
Engine: 4.0 I6
So I don't think I have ABS, I have a couple pics and questions.
1)Does it look like I'd be able to do the cowl set up on the drivers side?
2) Do you put a plastic mount on the fire wall and the air box?
3) What size self tapping screws did you use?
3) Can you put a cone filter in the stock air box, and what size?
Thanks in advance!
1)Does it look like I'd be able to do the cowl set up on the drivers side?
2) Do you put a plastic mount on the fire wall and the air box?
3) What size self tapping screws did you use?
3) Can you put a cone filter in the stock air box, and what size?
Thanks in advance!
Thread Starter
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
Answers in bold below
So I don't think I have ABS, I have a couple pics and questions.
NO ABS
1)Does it look like I'd be able to do the cowl set up on the drivers side?
YES
2) Do you put a plastic mount on the fire wall and the air box?
NO
3) What size self tapping screws did you use?
No screws, but #8 should be plenty big
3) Can you put a cone filter in the stock air box, and what size?
Unlikely that it will fit - use stock size air filters or stock replacement K&N
Thanks in advance!
NO ABS
1)Does it look like I'd be able to do the cowl set up on the drivers side?
YES
2) Do you put a plastic mount on the fire wall and the air box?
NO
3) What size self tapping screws did you use?
No screws, but #8 should be plenty big
3) Can you put a cone filter in the stock air box, and what size?
Unlikely that it will fit - use stock size air filters or stock replacement K&N
Thanks in advance!