Long arm or short arm
CF Veteran
Joined: Apr 2008
Posts: 13,952
Likes: 17
Model: Cherokee
Hell ill video it just using a 10ton press. But I want a check for the piece of DOM ill be wasting.
So you're claiming those company's use thinner material without any actual knowledge? As in pulling that claim out of your ***.
I've talked to rusty a few times about his long arm material.
So you're claiming those company's use thinner material without any actual knowledge? As in pulling that claim out of your ***.
I've talked to rusty a few times about his long arm material.
Didn't realize you so much invested in those companies.
So you're going to claim that everyone builds their arms with .25"wall D.O.M.?
Did you pull that out of your butt as well?
And kinking a piece of tube in a press is a far cry from doing it right, just so ya know.
CF Veteran
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
Originally Posted by SeriousOffroad
No, that would hurt.
Didn't realize you so much invested in those companies.
So you're going to claim that everyone builds their arms with .25"wall D.O.M.?
Did you pull that out of your butt as well?
And kinking a piece of tube in a press is a far cry from doing it right, just so ya know.
Didn't realize you so much invested in those companies.
So you're going to claim that everyone builds their arms with .25"wall D.O.M.?
Did you pull that out of your butt as well?
And kinking a piece of tube in a press is a far cry from doing it right, just so ya know.
I have no issue using a cheap HF bender to put a slight bend in .25" DOM. Its not like i would shove 2x.25 dom in a JD2 bender. It only takes a 5-10 degree bend on the long arms which is WELL before the kinking point of tube that thick.
CF Veteran
Joined: Apr 2008
Posts: 13,952
Likes: 17
Model: Cherokee
I based my comments on experience with those products and with my own.
As I stated earlier, TNT, Rusty's, and RC do not specify material thickness for their arms.
I do.
At no point did I bash any of them.
As I stated earlier, TNT, Rusty's, and RC do not specify material thickness for their arms.
I do.
At no point did I bash any of them.
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by SeriousOffroad
I based my comments on experience with those products and with my own.
As I stated earlier, TNT, Rusty's, and RC do not specify material thickness for their arms.
I do.
At no point did I bash any of them.
As I stated earlier, TNT, Rusty's, and RC do not specify material thickness for their arms.
I do.
At no point did I bash any of them.
CF Veteran
Joined: Apr 2008
Posts: 13,952
Likes: 17
Model: Cherokee
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
During my 7 hour dead period at work yesterday I watched this video ^^ about 10 times.. What a ****ing doofus. I wish he would have gotten thrown out and that pretty tj had slammed into a tree. No seatbelt...what a damn idiot.
Thread
Thread Starter
Forum
Replies
Last Post
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 6, 2015 03:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)