Installed rebuilt 703 injectors in the jeep "1987" yesterday and now it dies when coming to a stop, Any ideas? It never had any problems with the old ones. And yes the wires are connected to the right ones. I'm guessing bad injectors, just wanted to check before i take them out and send them back

 

Get 746s.

Or, you busted the vacuum line from the throttle body to MAP sensor.

 

The one going to the throttle body is a little lose but not broken

 

Must be PERFECT. Spray some carb cleaner around it at idle and see what happens.

 

ok will do

 

so for renix engines, 746's is better?

 

Just did a set on Programbo's suggestion and a bunch of Yeehaas from Flintstone. They work better than any others I've used.

 

ah I see.

 

I see said the blind man, as he picked up his hammer and saw.

 

I cracked/ broke vacume lines on the 89' I had some basic aquarium hose and slide it on the vacume line and it was a PERFECT fit, couldn't help but added some silicone addhesive. Had it overlapping the oem hose about a 1" on each side then push the two oem hose ends togther done.Did the spray test and not a single leak. Just two pennies in the bucket

 

anyone want a set of 703"s just rebuilt like new! haha

 

You'll probably be just fine.

Programbo, here on CF, sells the refurbished injectors for those of you that are interested.....

 

How much shipped to 27524?

 

I'm not really selling them they are there to stay for now. You should get the 743's Cruiser54 said they work better than 703 there is a link for them on here.

 

746s.