HID Headlight Kit
CF Veteran
Joined: May 2013
Posts: 1,056
Likes: 3
From: Washington, MO
Year: 2000
Model: Cherokee
Engine: 4.0
Please do not attempt a refund through Paypal as this creates a bigger headache for you and I than it is worth.
I did use a 2" hole saw, but if the light was hitting the hole I don't see how that would effect the cutoffs horizontal line. It would just stop you from adjusting the light properly. I'm going to mess with them a little more today and try a few things I read on Hid planet. Its possible its just the low quality bulbs.
Sooooo glad I made my own instead of ordering from him. Sorry everyone is having such rough luck so far.
CF Veteran
Joined: Nov 2011
Posts: 3,603
Likes: 3
From: SLC, Utah
Year: 1999
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Sep 2013
Posts: 1,922
Likes: 1
From: Eaton Co
Year: 2001
Model: Cherokee
Engine: 4.0
True. I was thinking that maybe the housing wasn't sitting correctly and that the reason your beam didn't go up is because it was canted down. But you would probably see evidence of that in the center because the other side would have to be more up. So yeah might not be the problem. I want to take a couple of shots of the jeep pattern compared to those of my other two cars with factory HID to see how the patterns look in comparison.
CF Veteran
Joined: Sep 2013
Posts: 1,922
Likes: 1
From: Eaton Co
Year: 2001
Model: Cherokee
Engine: 4.0
Mike, the cutoff would be slightly altered because of the bulb not seating in a level or straight manor if it's slightly pressing on the chassis due to adjustment. The shields are just flat pieces of metal so odds are it's a alignment issues within the projector such as the previously stated or a deformity within the reflector housing.
Sooooo glad I made my own instead of ordering from him. Sorry everyone is having such rough luck so far.
Sooooo glad I made my own instead of ordering from him. Sorry everyone is having such rough luck so far.

Newbie
Joined: Sep 2013
Posts: 24
Likes: 0
From: Libertyville, IL
Year: 1998
Model: Cherokee
Engine: 4.0
Don't worry I wasn't 100% sure what I was saying either LOL. I had a thought but it wasn't coming out properly. What I was saying is that if the light housing was not sitting perfectly horizontal then the left side being low would mean the right side would be high kind of like \ so to speak. And that doesn't look like the case in your pic. Am I correct in my thinking that you are using home made clips to hold the bulbs, or was that just what you had done previously and now you have proper clips?
I will see if I can get some pictures, that is if it ever quits snowing around here long enough.
I will see if I can get some pictures, that is if it ever quits snowing around here long enough.
CF Veteran
Joined: Sep 2013
Posts: 1,922
Likes: 1
From: Eaton Co
Year: 2001
Model: Cherokee
Engine: 4.0
Don't worry I wasn't 100% sure what I was saying either LOL. I had a thought but it wasn't coming out properly. What I was saying is that if the light housing was not sitting perfectly horizontal then the left side being low would mean the right side would be high kind of like \ so to speak. And that doesn't look like the case in your pic. Am I correct in my thinking that you are using home made clips to hold the bulbs, or was that just what you had done previously and now you have proper clips?
I will see if I can get some pictures, that is if it ever quits snowing around here long enough.
I will see if I can get some pictures, that is if it ever quits snowing around here long enough.
CF Veteran
Joined: Nov 2011
Posts: 3,603
Likes: 3
From: SLC, Utah
Year: 1999
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: May 2013
Posts: 1,056
Likes: 3
From: Washington, MO
Year: 2000
Model: Cherokee
Engine: 4.0
There is no harm in filing one.. it simply takes the money from him and they hold it until he can prove delivery.. its designed to protect you in cases like this.
Seasoned Member
Joined: Jul 2011
Posts: 379
Likes: 2
From: New England
Year: 2000
Model: Cherokee
Engine: 4.0L
ETA: Turns out the headlights already shipped, so if I am really in a pinch MAY be selling them on here.
Last edited by Synyster; Feb 3, 2014 at 04:29 PM.


