h4 lighting question
What brand housing do you have and did you use the wiring harness or not?A lot of hids kits on ebay are junk and throwing a hid kit in a housing not designed for it will blind people.And in some states adding hids to anything that didn't have them factory is illegal.
Member
Joined: Oct 2013
Posts: 241
Likes: 0
From: Smithville, ON
Year: 1999
Model: Cherokee
Engine: 4.0 HO
bulbs make a big difference too....
are you using the shytty ones that came with the kit or have you upgraded to Sylvania's or some other quality bulb. I noticed a substantial difference between stock and the SS Ultras.
I'm pulling mine out too, but i just picked up the TruckLite LED housings...no comparison there
are you using the shytty ones that came with the kit or have you upgraded to Sylvania's or some other quality bulb. I noticed a substantial difference between stock and the SS Ultras.
I'm pulling mine out too, but i just picked up the TruckLite LED housings...no comparison there
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
If they're the Autopal housings, they should work well.
But again, the harness needs to be done.
That simple mod alone gains a 35 to 40% increase in output with stock bulbs.
CF Veteran
Joined: Jan 2012
Posts: 1,130
Likes: 0
From: Ramona ca
Year: 1990
Model: Cherokee
Engine: 4.0
Put in a nice harness and some hella e code housings and some olympus off road led bulbs. I used flea bay housings and they fog up sometimes as they ARnt sealed. When I get some extra cash for the jeep I'm getting e codes
Thread Starter
Banned
Joined: Oct 2014
Posts: 17
Likes: 9
From: tucson
Year: 1992
Model: Cherokee
Engine: 4.0
H6054 is the number on my headlight housings. Made by Wagner. I was told it had the upgrade because the wiring has been upgraded and the headlight wiring goes to 2 relays. One on each side. I have ballasts sitting around and found some clear headlights with hid bulbs and no ballasts for real cheap so I thought I could use my ballasts and plug them into those other headlights. I know nothing about hids so that's why I ask on here
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
H6054 is the number on my headlight housings. Made by Wagner. I was told it had the upgrade because the wiring has been upgraded and the headlight wiring goes to 2 relays. One on each side. I have ballasts sitting around and found some clear headlights with hid bulbs and no ballasts for real cheap so I thought I could use my ballasts and plug them into those other headlights. I know nothing about hids so that's why I ask on here
Trending Topics
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
http://www.ebay.com/itm/200mm-H6054-H4-DOT-EURO-CONVERSION-HEADLIGHTS-KIT-/330591764599?pt=Motors_Car_Truck_Parts_Accessories&hash=item4cf8ce0077&vxp=mtr
The diamond cut/euro headlights scatter the light more which will make your lights seem worthless even on high beam.And that ebay link is for a hid kit in a none hid housing that will blind people and the blue color will get you pulled over fast.Stick to a good brand h4 housing like hella and good brand blubs.That combo should be more then enough light for you,If not add a set of driving lights to your bumper which is legal.
Junior Member
Joined: Oct 2011
Posts: 88
Likes: 1
From: Papillion, NE
Year: 2000
Model: Cherokee
Engine: 4.0
If you have your heart set on hids https://www.cherokeeforum.com/f10/hi...usings-194414/
Which sucks, because I was starting to get excited about those babies.


