Dana 60 rear ID
CF Veteran
Joined: May 2011
Posts: 2,516
Likes: 4
From: va
Year: 1996
Model: Cherokee
Engine: i-6 4.0
Im willing to bet there are only a couple (if not just one) dana 60 pinion seals available for the older rearends anyway. and this rearend will run of the more common ones.
When you buy a dana 60 master install kit, they don't ask what pinion seal you need, they all come with the same seal. and the master install kit I used worked for everything in my 60-2.
When you buy a dana 60 master install kit, they don't ask what pinion seal you need, they all come with the same seal. and the master install kit I used worked for everything in my 60-2.
Thread Starter
Junior Member
Joined: Dec 2012
Posts: 81
Likes: 0
From: Eastern CT
Year: 1993
Model: Cherokee
Engine: 4.0 HO
do these numbers help? they were on the diff cover itself. i didnt notice them before because the cover was dirty.
DANA
43607
100 6
REV F
05 02 94
DANA
43607
100 6
REV F
05 02 94
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Searching those numbers mentions that axle being from the front of a Dodge truck but I'm not 100% sure. Was there a small tag on one of the diff cover bolts?
Thread Starter
Junior Member
Joined: Dec 2012
Posts: 81
Likes: 0
From: Eastern CT
Year: 1993
Model: Cherokee
Engine: 4.0 HO
no, there were only 2 tags that both said dynatrac on them. it is also possible that the cover came off of a front dana 60 and was put on my rear dana 60. im new to axles, but is it possible that i have a front axle in my rear end? didnt think that was possible...
Thread Starter
Junior Member
Joined: Dec 2012
Posts: 81
Likes: 0
From: Eastern CT
Year: 1993
Model: Cherokee
Engine: 4.0 HO
i do have pictures now on my phone, but i dont know how to post them using the cherokeeforum app. i'll have to post them when i get home and can get to my computer. what pictures would you like? i took ones of the diff cover, inside the diff, where it meets the brakes on both sides, and the whole thing.
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
i do have pictures now on my phone, but i dont know how to post them using the cherokeeforum app. i'll have to post them when i get home and can get to my computer. what pictures would you like? i took ones of the diff cover, inside the diff, where it meets the brakes on both sides, and the whole thing.
I'd pull the seal and go to the parts store and compare....
Or go to a parts store that has competent people working.
Thread Starter
Junior Member
Joined: Dec 2012
Posts: 81
Likes: 0
From: Eastern CT
Year: 1993
Model: Cherokee
Engine: 4.0 HO
i just got back from the parts store. i pulled the seal and it has no numbers on it. only one on the rubber that didnt lead to anything on the napa computer or in their books. i got a seal for dodge truck but it was just a tad too big. the micrometer said was like 10 different or something like that and the guy at napa told me it was maybe because i warped the seal when pulling it out. tried to put it in when i got back, didnt quite fit. unless im trying to put it in wrong? just tapping around the rim of it lightly to get it started. but it just keeps popping out the other side.
Thread Starter
Junior Member
Joined: Dec 2012
Posts: 81
Likes: 0
From: Eastern CT
Year: 1993
Model: Cherokee
Engine: 4.0 HO
Thread Starter
Junior Member
Joined: Dec 2012
Posts: 81
Likes: 0
From: Eastern CT
Year: 1993
Model: Cherokee
Engine: 4.0 HO