Cut and weld Rear Drive Shaft?
CF Veteran
Joined: Mar 2012
Posts: 1,369
Likes: 0
From: Richmond, VA
Model: Cherokee
Whats your caster angle like? At 4.5" without UCAs it's likely it's off enough to create some vibes.
I'd stay away from any shop that's telling you to trim your driveshaft. Finding vibrations in a recently lifted vehicle is pretty common. You're introducing new parts and changing angles of everything in a suspension system that's 20 years old. There's going to be some fine tuning.
I'd stay away from any shop that's telling you to trim your driveshaft. Finding vibrations in a recently lifted vehicle is pretty common. You're introducing new parts and changing angles of everything in a suspension system that's 20 years old. There's going to be some fine tuning.
Thread
Thread Starter
Forum
Replies
Last Post
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Feb 27, 2023 03:38 PM
CJG
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Sep 28, 2015 03:46 PM
Eli Brda
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 27, 2015 04:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)