nowayitstaysjeep

Im Looking for some tall front bump stops for my 6.5 long arm. Ive seen some lower 5 inch ones but forgot what website that they were on. Im really just looking for any idea of how to do it or where to get them. Any type of bought ones or homemade ones will give me some help?
Thanks in advance!
taylor

OOdynamite

You can make some out of hockey pucks

nowayitstaysjeep

Yah ive heard of that but havent seen any pics or anything!

Mendax13

i believe i saw some on rustys you can cut it to any length you want. it does look like hockey puck material.

OOdynamite

Yea iv never seen them, but I know a lot if people do it. I'm sure a google search would bring up a lot

Converted96

here...

http://greatlakesxj.activeboard.com/...ont-bumpstops/

includes write up and pics.

I am just on the tail end of doing my lift, before my new springs went in i drilled and tapped a 3/8" hold in the middle of the spring perch to prepare for the hockey puck mod.

like 8 bucks for the drill bit and tap, and hockey pucks can be found for about 1-2 bucks.

I dont think you will find a 5" bump stop for under 10 bucks... this way you can flex your jeep out, get the measurement of the amount of bumpstop you need, and buy pucks to suit.

nowayitstaysjeep

Im thinking the hockey puck idea is prolly gonna be the easiest cheapest way to do it. I had another idea and was wondering if tj dana d30 bumpstops would work??? idk why they wouldnt

OOdynamite

Idk why they wouldn't either, but I can't say for sure

nowayitstaysjeep

I think these are what i remember seeing... http://motionoffroad.com/catalog/ind...oducts_id=2200
I might go this route along with a puck or 2 on the bottom.