Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

Am i ok?? Or do i need a new part?

Thread Tools
 
Search this Thread
 
Old 08-04-2016, 11:48 AM
  #1  
CF Veteran
Thread Starter
 
Batman33165's Avatar
 
Join Date: Apr 2013
Location: Rowlett, Texas
Posts: 1,153
Received 7 Likes on 5 Posts
Year: 1988
Model: Cherokee
Engine: 4.0 Inline 6
Default Am i ok?? Or do i need a new part?

I have a 1988 jeep cherokee, on what i believe is on a 6 inch at least. Manual transmission, 4X4, still dana 30 in the front and dana 35 in the rear.

So my question, Ive replaced almost everything in the front suspension just so it rides smooth now. My question is on the trac bar, do i need a shorter pitman arm? If i remember correctly and have been searching online... the steering linkage and trac bar are supposed to be parallel. Mine criss cross a little.

Comments or ideas are appreciated, Thanks....
Attached Thumbnails Am i ok?? Or do i need a new part?-20160708_223219.jpg  
Old 08-04-2016, 08:21 PM
  #2  
Banned
 
Jeep Driver's Avatar
 
Join Date: Jan 2014
Posts: 1,054
Likes: 0
Received 2 Likes on 1 Post
Model: Cherokee
Default

Put the sway bar back where it belongs.
Old 08-05-2016, 05:42 AM
  #3  
aka Wade-O
 
89eliminator's Avatar
 
Join Date: Dec 2008
Location: IN
Posts: 3,703
Likes: 0
Received 10 Likes on 9 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0
Default

yes, put on a stock pitman arm.
Old 08-05-2016, 10:02 AM
  #4  
CF Veteran
Thread Starter
 
Batman33165's Avatar
 
Join Date: Apr 2013
Location: Rowlett, Texas
Posts: 1,153
Received 7 Likes on 5 Posts
Year: 1988
Model: Cherokee
Engine: 4.0 Inline 6
Default

yea i have those brackets off, and the sway bar back where it belongs. either way its not connected.
Old 08-05-2016, 10:03 AM
  #5  
CF Veteran
Thread Starter
 
Batman33165's Avatar
 
Join Date: Apr 2013
Location: Rowlett, Texas
Posts: 1,153
Received 7 Likes on 5 Posts
Year: 1988
Model: Cherokee
Engine: 4.0 Inline 6
Default

okay, thanks 89...
Old 08-05-2016, 11:58 AM
  #6  
Junior Member
 
Reble's Avatar
 
Join Date: Dec 2015
Location: Tucson, AZ
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Talking

Originally Posted by Batman33165
My question is on the trac bar, do i need a shorter pitman arm? If i remember correctly and have been searching online... the steering linkage and trac bar are supposed to be parallel. Mine criss cross a little.
Having a dropped pitman isn't necessarily a problem if the drop on the TrackBar matches the drop on the DragLink. (Steering Link).

So if you have a TrackBar that drops 5 inches your DragLink needs to have the same drop. This may require a dropped Pitman arm. The TrackBar and DragLink do have to be paralell, but not on the same plane (?) if that makes sense.

The goal is that the arc of the TrackBar has the same arc as the DragLink, this removes bumpsteer.

So it does look to me from the picture that your Pitman arm is about 2 inches too low. Raising it make it parralel with your DragLink being about a half inch above the line you have for the TrackBar.

My question is ... Do you have any Bumpsteer? You stated you did all this work so it rides smooth but did not mention if you have bumpsteer. If your steering is not affected by a bump in the road, speedbumps or hard braking, I'd leave it for now. That is of course you nothing else that needs fixing on the XJ.
Old 08-05-2016, 12:00 PM
  #7  
Junior Member
 
Reble's Avatar
 
Join Date: Dec 2015
Location: Tucson, AZ
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Default

PS. If you want to connect your Swaybar, I'd recommend the Synergy Sway Bar relocate blocks.

Worked like a charm for my XJ with 6.5 lift.

https://www.cherokeeforum.com/f67/sy...nts-xj-226208/
Old 08-08-2016, 08:48 AM
  #8  
CF Veteran
Thread Starter
 
Batman33165's Avatar
 
Join Date: Apr 2013
Location: Rowlett, Texas
Posts: 1,153
Received 7 Likes on 5 Posts
Year: 1988
Model: Cherokee
Engine: 4.0 Inline 6
Default

Honestly i haven't driven it lol... i recently got the brake pads in and then i had to go to a family event. Basically all that is left to do is bleed the brakes but ill keep you guys updated... thanks for your opinion
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jackson1714
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
23
06-01-2019 05:36 PM
greenbastard96
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-29-2016 01:35 PM
Ditchdigger
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
03-26-2016 06:19 AM
jeep187
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
01-09-2009 04:09 PM
nelsonkn
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
9
03-15-2008 01:06 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Am i ok?? Or do i need a new part?



All times are GMT -5. The time now is 07:35 PM.