all muffler and exhaust questions go here!!!!!!
#4921
CF Veteran
Join Date: Jul 2013
Posts: 1,149
Likes: 0
Received 35 Likes
on
24 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Seems like either option would probably work. I'd be very inclined to find a muffler shop that would glue it all together for a decent price. Took my Cherokee to a muffler shop and they redid from just before the crossmember to the muffler for $45 welding in an o2 bung
#4922
Seasoned Member
Any one have one of these mufflers installed Total flow (Pic)
Wornder what they sound like only $30 looks sturdy too .
#4923
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by papablista
Wornder what they sound like only $30 looks sturdy too .
#4924
Newbie
Join Date: Oct 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee (XJ)
Engine: 4.0 L6
Hey so I am brand new to this. Just bought a 93 XJ - 4.0 i-6 engine - And I need to probably replace the header / exhaust system. What would you all recommend for replacing the headers / exhaust completely? I think the entire back end needs to be replaced; I haven't dug too deep into the condition, but It definitely sound and feels like new headers.
#4925
Moderator CF K9-unit
Join Date: Apr 2012
Location: Alaska
Posts: 5,842
Likes: 0
Received 9 Likes
on
8 Posts
Year: 2000 sport
Model: Cherokee (XJ)
Engine: New 4.0l from s&j engines
Hey so I am brand new to this. Just bought a 93 XJ - 4.0 i-6 engine - And I need to probably replace the header / exhaust system. What would you all recommend for replacing the headers / exhaust completely? I think the entire back end needs to be replaced; I haven't dug too deep into the condition, but It definitely sound and feels like new headers.
Are you talking you want to replace with stock exhaust manifold or aftermarket header?
her are exhaust parts..
https://www.4wheelparts.com/b/jeep-r...-cm7gsZ1z0s229
If it was me, I would go aftermarket header (Gibson)
#4926
Newbie
Join Date: Oct 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee (XJ)
Engine: 4.0 L6
Yeah I would like to go aftermarket for both. I'm going to tune up the engine, and I would like to go aftermarket for the headers, muffler, etc. Last time I dealt with stuff like this was on my old 05 Dakota where I put a flowmaster on it.
Also, would you recommend a K&N intake system for this engine, or something else?
Also, would you recommend a K&N intake system for this engine, or something else?
#4927
Moderator CF K9-unit
Join Date: Apr 2012
Location: Alaska
Posts: 5,842
Likes: 0
Received 9 Likes
on
8 Posts
Year: 2000 sport
Model: Cherokee (XJ)
Engine: New 4.0l from s&j engines
Yeah I would like to go aftermarket for both. I'm going to tune up the engine, and I would like to go aftermarket for the headers, muffler, etc. Last time I dealt with stuff like this was on my old 05 Dakota where I put a flowmaster on it.
Also, would you recommend a K&N intake system for this engine, or something else?
Also, would you recommend a K&N intake system for this engine, or something else?
or make your own cowl snorkel.
Lots of threads about making one.
#4929
Member
What's the best muffler I can get with a deep tone but no annoying sound while cruising down the highway that's under $40? I was thinking of a cherrybomb but that might be too loud
#4930
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by Djbtraxxas
What's the best muffler I can get with a deep tone but no annoying sound while cruising down the highway that's under $40? I was thinking of a cherrybomb but that might be too loud
#4931
Member
I had a thrush welded one that i found in the trunk of my XJ when I got it but the holes were offset on both sides so it was resting on the frame rail on one side and less than 1/16 of a inch from the driveshaft when I tried to install it. I'm trying to sell it and I'll probably pick up one that would fit better
#4932
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by Djbtraxxas
I had a thrush welded one that i found in the trunk of my XJ when I got it but the holes were offset on both sides so it was resting on the frame rail on one side and less than 1/16 of a inch from the driveshaft when I tried to install it. I'm trying to sell it and I'll probably pick up one that would fit better
#4933
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by Djbtraxxas
I had a thrush welded one that i found in the trunk of my XJ when I got it but the holes were offset on both sides so it was resting on the frame rail on one side and less than 1/16 of a inch from the driveshaft when I tried to install it. I'm trying to sell it and I'll probably pick up one that would fit better
#4934
Newbie
Join Date: Apr 2017
Location: South Bend
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Dear Exhaust Genius,
I just purchased a fully stock 2001 XJ and I want to do a full exhaust header-to-tip upgrade cats and all. I want to be cali compliant due to being active navy and there being a good chance I will be back in SD in about a year. Do I have any options with all parts costing under 1k? I am looking for better tone (not much louder) and some performance gains. Thank you, Great Sage.
I just purchased a fully stock 2001 XJ and I want to do a full exhaust header-to-tip upgrade cats and all. I want to be cali compliant due to being active navy and there being a good chance I will be back in SD in about a year. Do I have any options with all parts costing under 1k? I am looking for better tone (not much louder) and some performance gains. Thank you, Great Sage.
#4935
ExhAust system
I just purchased a 2000 XJ sport 4x4 4.0, and cannot seem to get straight answers from the internet on an exhaust replacement. I see 2.25" and 2.5" as direct replacements. how is this possible? I'm looking to replace the cat, pipe to muffler, muffler, and tail pipe.
Any help is appreciated.
Darryl
Any help is appreciated.
Darryl