The vendor on here substitutes another company's springs in, so I believe ZONE offers full packs

 

Zone does have a full pack 4.5" option, according to our vendor on the forum. They are out of stock at the moment, though. You'd have to ask him about price, but Zone and BDS are both run by the same company. I would trust their parts, but I haven't personally used any yet.

 

Alright thanks guys. How do i contact him?

 

Here ya go:
https://www.cherokeeforum.com/f10/zo...pension-81692/

 

Thanks man. I appreciate it.

 

No problem
Good luck with the lift.

 

if im only putting on a 2' lift will i still need to upgrade the track bar or pitman arm to avoid death wobbles? is it something i can get away with not doing? or for longevity of the heep is it something i should just do anyway.... eventually

 

I don't think you need to. Until you go bigger. And you WILL go bigger.

 

Nice. I didn't see it on their site when I looked at them.

 

awesome bud thank you for the help. haha i'm absolutely sure i will, but for right now im just on todo list #1

 

What is the maximum size wheel and tire combo you can put on a stock Dana 35???

 

Some ppl will say just get rid of it. I have one and wouldn't go bigger than 33's but even then if you are too hard on it, it will break. Just be easy on the gas lol

 

The general agreement that I've read is to not go above 31's. I had a 35 that I wheeled with 31's and I was always nervous, but it survived

 

I and if you're going to get 31x10.5's I would go with a 15x8 rim

 

I had 33s on a 35 in my 88 XJ and never had a problem except blowing apart the spider gears one yime. My friend had 32s on his TJ and kept snapping axles. My XJ was a none c clip so maybe that was the difference. I wasn't nice to it either!