i wanna put a 4.5 RC with full leaf packs, steering stabilizer, and nitro 9000 shocks on 2000 sport. What modifications (sye, control arm drop kit, etc) do i need so my jeep will ride without causing extra wear to my drivetrain? I dont really care about ride comfort otherwise i woulda bought a beamer but i dont want any extra vibes and i will be running 31's

 

well a t-case drop would be enough but a sye is the best option. you know you'll need new control arms and brake line but thats about it.

and imo go 33's

 

I have told him when I first got the lift, he said he would look into it, but I never heard back from him. I read a lot of others have had the same issue with the full leafs.

 

Ok thanks man. And I will go 33's but I already got a new set of 31's and I just wanna get some use out of them. And where could I get new brake lines?

 

quadratec has some. but you can snag some off a YJ that will give you 4 inches longer i believe

 

i have a 4.5" bds on 33's now and want to fit 35's. My fenders are cut already but idk if they will rub much i havent been able to find anyone around my area with 35's on jeep or small bolt ford rims to try. I also was wondering what people thought about doing a 3/4" coil spacer and a 1" or 2" block with just a transfer case drop or whether i need to do the sye? just on a budget and trying to save a little money

 

looking to buy a 3" lift kit dont know which one is better rancho or skyjacker any ideas

 

ok thanks ill get a build thread started when i start workin on it

 

I just got RE leafs and coils and was wondering if i need to change the control arms and if so what length and does anyone have recommendations for them?

 

What size lift?

 

3.5

 

Ok an easy one. What size lift to run 33's on a 98 zj ?

 

what size wheels will fit 265/70/17 tires and what should the backspacing/offset be so the tires arent tucked under my fenders, i want them to stick out a little bit

 

so no one knows if a 2wd driveshaft will work with a 5.5" lift? (4.5 leaf + 1" shackle)

 

I'd say 17x8 with a backspacing anywhere in the higher 3's, like 3 1/2 to 3 3/4 will stick out pretty wide. Im running 3 1/2 backspacing and they stick out real wide.