Install parts I already have from IronRock: Double Shear track bar, heavy duty spring retainers and front driveshaft u-joint.

Then:

Recenter axle
Replace valve cover gasket
Install apn header
build 2.5" exhaust with high flow cat and vibrant muffler
convert 8.25 to disks
rear diff cover
find an aftermarket front bumper

and most importantly,

Get her out of Florida so I can actually drive up and down hills.

 

No particular order.

1. Monstaliner interior, rockers, and lower part of doors.
2. Install 703 Injectors (already have them, going to rebuild them first)
3. Oil change - Rotella T6 5w40 + Napa Gold filter
4. Finish all body rust repairs underneath (might happen before Jan 1st)
5. New fuel pump module (already ordered)
6. Hitch installed (already have it, need to order nutstrips)
7. 3" lift kit install (Zone kit, already have it to go on)
8. Double shear track bar (probably IRO)
9. Bumpstops
10. Possibly some new 32's or 33's.
11. New rear bumper methinks

 

-painted RE 4.5'' coils
-painted RE superflex adj. LCA/UCA
-front bilstein 5100s
- d30 swap w/ 4.10s an serious offroad one ton steering
-29 sp c8.25 swap w/ 4.10s and a detriot
-00 np231 swap w/ sye and driveshaft
-hella 55w driving lights on detours a-pillar bracets
-led light bar
-detours tail bone
-full size spare
-back up lights
-flow kooler pump/ 180 tstat
-wj v8 pwr steering pump
-zj seats
-custom storage area
-try and start on a stroker by the end of the year


....just to name a few....

 

Get her tags and insurance. Get her back on the road. And get her some new tires. And maybe paint her and add hood vents.

 

1. Finish my 3.4L swap
2. Install long arms
3. More lift
4. 231 swap
5. Axle build
6. Make it to Moab
7. Wheel more with the people I like

 

button up maintenance needs like gaskets, belt, drum brakes (maybe even disc conversion if I can learn how), etc. then i'll look at fun stuff.
any thoughts on best vehicle to scavenge a disc system from?

 

Doesn't look like 2014 is going to be a year with plenty of disposable income, so, hopefully get my a pillar gauges installed that I bought months ago, finish up modifying the door hinges to easily go doorless, and hopefully get time to take a few close to home wheeling trips

 

dont blow it up.........thats never going to happen
no order on these
new shocks
sye
5.13 gears
hydro assist
rear disc.
e350 brake master cylinder

 

I dont want to set the bar to high so... Bumpers, sliders, lokka lockers, and maybe a winch.