i have seen a couple of jeeps on her with switch panels that had four switches and i was wondering what is it that you guys have wired up to toggles.

 

Well, My XJ only has 2 switches right now, for the roof lights. My old TJ had 8, 1 for the front locker, 1 for the rear locker, 4 for lights, 1 for air compressor, 1 high idle.

 

all labeled for ya!

I used 2 way-3prong toggles for the lights (so they are wired up just like you would a normal rocker switch) and then i used a 3 way-3prong toggle to control the AC fan.

btw this was taken mid wiring so my interior looks a mess..... it was a clean instal and there is no wiring showing

 

Maybe these will help with some ideas. Not all are four switches, but some different takes on switches and mounting locations.

https://www.cherokeeforum.com/f59/pi...witches-34995/

https://www.cherokeeforum.com/f2/whe...-40083/index2/

https://www.cherokeeforum.com/f2/switches-26361/index2/

Here is mine, as posted in one of the above threads. Top to bottom..
Outter front roof lights
Inner front roof lights
Rear roof lights
Rear bumper lights

 

i am making a switch plate over my coin holder below the shifter with a piece of a road sign it will be able to fit for switches i have 1 so far for my lights on my bumper and next week after i change my radiator i am putting my e fan on a switch and was wondering what else i could put on toggle to fill up the other two spots

 

switches for my air lockers

 

scavenger j your switches are awesome! thats exactly what i wanted to do. for my rear and front air lockers when i get them and all the lights n etc. yours is so pretty makes me want to do it before i get the other stuff haha

 

here is a paper cut out of what the panel will look like.



i wish i could afford lockers at least for my front but my jeep is a pos and i have to spend enough money just to keep it running