What did you do to your Cherokee today?
CF Veteran
Joined: Apr 2011
Posts: 4,825
Likes: 2
From: Indianapolis
Year: '99 and '91
Model: Cherokee
Cleaned my spectre cowl intakes filter today. Pics of what it looks like after 8 months and about 10k miles.
Inside was spotless. It was dry and needed oil though. I bought the specter brand clean and oil kit. Cleaner worked good. I used a hair dryer to dry it out because I got impatient. Worked great. Applied the spectre recommended 20ml of oil evenly. It felt like a lot but that's what it said.
I also bought these today
From HF good stuff IMO they're for impacts but they're 1/4" drive and work great in non impact uses so far.
I also cleaned all the sensors on the TB (really just the one closest to the engine) and clean the TB itself. Seems to idle a bit better. The RPM needle doesn't flutter. We'll see if it stop the temp loss of power after starting.
Inside was spotless. It was dry and needed oil though. I bought the specter brand clean and oil kit. Cleaner worked good. I used a hair dryer to dry it out because I got impatient. Worked great. Applied the spectre recommended 20ml of oil evenly. It felt like a lot but that's what it said.
I also bought these today
From HF good stuff IMO they're for impacts but they're 1/4" drive and work great in non impact uses so far.
I also cleaned all the sensors on the TB (really just the one closest to the engine) and clean the TB itself. Seems to idle a bit better. The RPM needle doesn't flutter. We'll see if it stop the temp loss of power after starting.
Seasoned Member
Joined: Oct 2012
Posts: 414
Likes: 3
From: Minnesota
Year: 1998
Model: Cherokee
Engine: 4.0 Liter Inline 6
S-10 Bastard Pack
Finished up painting my bastard pack leafs and then realized that I'll have to do the stencil again...on the xj main otherwise they'll just going to be covered up! 
CF Veteran
Joined: Nov 2010
Posts: 15,581
Likes: 8
From: some small town oregon
Year: 1989
Model: Cherokee
Engine: 4.0