What did you do to your Cherokee today?
Senior Member
Joined: Oct 2010
Posts: 659
Likes: 0
From: New Haven, CT
Year: 1995
Model: Cherokee
Engine: 4.0L
XJs tow just fine, pull more than any liberty or new Cherokee could.
Seasoned Member
Joined: Oct 2012
Posts: 414
Likes: 3
From: Minnesota
Year: 1998
Model: Cherokee
Engine: 4.0 Liter Inline 6
They have arrived!
My new shocks arrived to go along with my S10 bastard pack lift!!
Saved a bunch too! 4 WHEEL PARTS had 10% off on top of the sale price of the shock, then I found a $10 off coupon code, and then on top of that there is a $35 rebate I'll be sending in!!
Saved a bunch too! 4 WHEEL PARTS had 10% off on top of the sale price of the shock, then I found a $10 off coupon code, and then on top of that there is a $35 rebate I'll be sending in!!
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
whoh that's a really big trailer to be loaded behind an XJ. The XJ isn't heavy enough to control that kind of a load.
I pulled a 5x10 uhaul with dual axles and THAT was all over the place behind my XJ...you need to be extremely careful with that thing - load heavy stuff toward the front.
I pulled a 5x10 uhaul with dual axles and THAT was all over the place behind my XJ...you need to be extremely careful with that thing - load heavy stuff toward the front.
Senior Member
Joined: Mar 2012
Posts: 658
Likes: 0
From: grand rapids
Year: 97
Model: Cherokee
Engine: 4.0
Got the rear end up today. Front sits at 5-5.5" rear at 4-4.5" I like it alot. I strongly dislike when a jeep is "level" and the *** end is up in the air.
Member
Joined: Jan 2013
Posts: 163
Likes: 0
From: Gray, Louisiana
Year: 1992
Model: Cherokee
Engine: 4.0L Stock Straight 6
The trailer pulled fine. A little heavy. Don't usually pull it. Borrowed it from a friend to move furniture. The heavier the load. It just got harder to pull it. But didn't bounce around or anything. Did a good job.
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Got the trussed D44 installed in the Comanche, and I have rear brakes for the first time in months. In the process, we realized that I got bad info, and my driveshaft needs to be shortened. Also, I learned that D44s are heavy, and 'on my fingertip' is not the best place to drop them.
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Member
Joined: Mar 2012
Posts: 195
Likes: 0
From: Atlantic City, New Jersey
Year: 1987
Model: Comanche
Engine: 4.0
Burped the cooling system, works great now 
And I finally fixed my shift boot!
(that plastic part the metal is covering was to hold the boot in but it was worn down
And I finally fixed my shift boot!
(that plastic part the metal is covering was to hold the boot in but it was worn down
Senior Member
Joined: Jul 2009
Posts: 739
Likes: 0
From: San Diego, CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Bought a Little Guy travel trailer. I just wasn't happy with the liftgate tent and I still had to break camp if I wanted to go out and explore. Hope I have as much fun as I think I'll have! Picking it up tomorrow. Might even take it to Mexico this weekend.
Member
Joined: Feb 2013
Posts: 122
Likes: 0
From: Littleton, Co
Year: 1992
Model: Cherokee
Engine: 4.0 HO
finished my axle swap but now have what seems like a popping track bar and a passenger leaking caliper. i hope i dont have to swap out the lines for the 88 style ones -_-