Rusted out rockers
Thread Starter
Junior Member
Joined: Feb 2013
Posts: 96
Likes: 0
Model: Cherokee
Rusted out rockers
Just wondering how you guys fix the rusted rockers? Im not thinking fancy body work. Maybe just cut right above the highest rust spot straight across and weld something bigger on the frame that comes out to where the rockers are? What all did you guys do? Pics of what you did would be great.
Seasoned Member
Joined: Jun 2012
Posts: 427
Likes: 0
From: Ronceverte WV
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Rock Auto has replacement rocker panels that you weld on. BUT if it's time to replace, you might as well upgrade. I'm currently trying to source out some box tubing to replace mine.
CF Veteran
Joined: Nov 2008
Posts: 1,021
Likes: 3
From: mass
Year: 1992
Model: Cherokee
Engine: 4.0 high output
Just finished doing mine
Lots a pics
It's hard to see but I welded angle iron to the inner rocker and then slid the 2x6 into it and welded them together
Also welded a 1" strip of 1/8th along the top of the 2x6 to make it easier to weld to the sheet metal
Lots a pics
It's hard to see but I welded angle iron to the inner rocker and then slid the 2x6 into it and welded them together
Also welded a 1" strip of 1/8th along the top of the 2x6 to make it easier to weld to the sheet metal
Last edited by xjheep92; Feb 16, 2013 at 03:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
Dec 11, 2015 11:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)